Digital Blood Pressure Monitor Model UA-851 Instruction Manual Original Manuel d’instructions Traduction Manual de Instrucciones Traducción Manuale di Istruzioni Traduzione Bedienungsanleitung Übersetzung 使用手冊 翻譯 1WMPD4001437C
Contents Dear Customers.................................................................... 1 Preliminary Remarks ............................................................. 2 Precautions........................................................................... 2 Parts Identification................................................................ 3 Symbols................................................................................ 4 Operation Mode......................................................
Preliminary Remarks This device conforms to the European Directive 93/42 EEC for Medical Products. This is made evident by the mark of conformity. (0123: The reference number to the involved notified body) The device is designed for use on adults only, not newborns or infants. Environment for use: The device is for use in the home healthcare environment. This device is designed to measure blood pressure and pulse rate of people for diagnosis.
Parts Identification Artery Position Mark Proper Fit Range Air Connector Plug Display Index Mark Arm Cuff Air Hose Air Socket START Button (Blue illumination) Battery Compartment Battery Cover 1.5V Batteries (R6P, LR6 or AA) DC Jack Part of Display MEMORY Pressure Bar Indicator and WHO Classification Indicator Heart Mark Battery Indicator I.H.B.
Symbols Symbols Function / Meaning Recommended Action Standby and turn the device on. Battery installation guide Direct current SN Serial number Date of manufacture Type BF: Device, cuff and tubing are designed to provide special protection against electrical shocks. The indicator that appears while Measurement is in measurement is in progress. It blinks progress. Remain as still when the pulse is detected. as possible. Irregular Heartbeat indicator. (I.H.B.
Symbols Function / Meaning Manufacturer Class II device Recommended Action Refer to instruction manual/booklet Polarity of DC jack Operation Mode 1. Normal Measurement With Storing Data (Refer to page 9) Press the START button. Blood pressure is measured and data are stored within the device. The device can store the last ninety sets of data in memory automatically. 2. Recalling The Data (Refer to page 11) When nothing is displayed, press and hold the START button.
Using The Monitor Installing / Changing The Batteries 1. Slide the battery cover to open it. 2. Remove the used batteries and insert new batteries into the battery compartment as shown, taking care that the polarities (+) and (-) are correct. 3. Slide the battery cover to close it. Use only R6P, LR6 or AA batteries. Step 2 Step 1 Step 3 CAUTION Insert the batteries as shown in the battery compartment. If not, the device will not work.
Using The Monitor Selecting the Correct Cuff Size Using the correct cuff size is important for an accurate reading. If the cuff is not the proper size, the reading may yield an incorrect blood pressure value. The arm size is printed on each cuff. The index and proper fit range, on the cuff, tell you if you are applying the correct cuff. (Refer to "Applying The Arm Cuff" on the next page. ) If the index points outside of the range, contact your local dealer to purchase a replacement cuff.
Using The Monitor Applying The Arm Cuff 1. Wrap the cuff around the upper arm, about 1-2 cm above the inside of the elbow, as shown. Place the cuff directly against the skin, as clothing may cause a faint pulse, and result in a measurement error. Do not roll up shirtsleeve tightly Cuff Artery position mark 2. Constriction of the upper arm, caused by tightly rolling up a shirtsleeve, may prevent accurate readings. 3. Confirm that the index within the proper fit range.
Measurements Model UA-851 is designed to detect the pulse and to inflate the cuff to a systolic pressure level automatically. If your systolic pressure is expected to exceed 230 mmHg, read "Measurement With The Desired Systolic Pressure" on the next page. Normal Measurement 1. Place the cuff on the arm (preferably the left arm). Sit quietly during measurement. 2. Press the START button. All of the display segments are displayed. Then, 0 (zero) is displayed blinking briefly.
Measurements Measurement With The Desired Systolic Pressure If your systolic pressure is expected to exceed 230 mmHg, use this procedure. 1. Place the cuff on the arm (preferably the left arm). 2. Press and hold the START button. Release the button when the average of all the data in memory is displayed. Press and hold the START button again until a number about 30 to 40 mmHg higher than your expected systolic pressure appears. 3.
Recalling Memory Data Note: This device stores the last ninety measurements in memory. The data are retained as long as the batteries are in the device. When you remove the batteries or the batteries are drained, the data will be erased. START Press and hold 1. Press and hold the START button until the average of all the data stored in memory is displayed. Release the START button. 2. Then, the data number of the most recent measurement and the data are displayed.
What Is An Irregular Heartbeat The device provides a blood pressure and pulse rate measurement even when an irregular heartbeat occurs. An irregular heartbeat is defined as a heartbeat that varies by 25% from the average of all heartbeats during the blood pressure measurement. It is important that you be relaxed, remain still and do not talk during measurements. Note: We recommend contacting your physician if you see this indicator frequently.
About Blood Pressure What Is Blood Pressure? Blood pressure is the force exerted by blood against the walls of the arteries. Systolic pressure occurs when the heart contracts. Diastolic pressure occurs when the heart expands. Blood pressure is measured in millimeters of mercury (mmHg). One's natural blood pressure is represented by the fundamental pressure, which is measured first thing in the morning while one is still at rest and before eating.
Blood Pressure described in this manual to get to know your normal blood pressure. Regular readings give a more comprehensive blood pressure history. Be sure to note date and time when recording your blood pressure. Consult your doctor to interpret your blood pressure data. Typical fluctuation within a day (Measured every five minutes) Systolic Diastolic Sleep Troubleshooting Problem Possible Reason Recommended Action Replace all batteries with new Nothing Batteries are drained. ones.
Maintenance Do not open the device. It uses delicate electrical components and an intricate air unit that could be damaged. If you cannot fix the problem using the troubleshooting instructions, request service from your dealer or from the A&D service group. The A&D service group will provide technical information, spare parts and units to authorized dealers. The device was designed and manufactured for a long service life.
Accessory AC adapter TB-233 TB-233C The adapter is to connect the blood pressure monitor to a power source at home. Please contact your local A&D dealer for purchasing. The AC adapter is required to be inspected or replaced periodically.
1-243 Asahi , Kitamoto-shi, Saitama 364-8585, JAPAN Telephone: [81] (48) 593-1111 Fax: [81] (48) 593-1119 A&D INSTRUMENTS LIMITED Unit 24/26 Blacklands Way, Abingdon Business Park, Abingdon, Oxfordshire OX14 1DY United Kingdom Telephone: [44] (1235) 550420 Fax: [44] (1235) 550485 A&D ENGINEERING, INC. 1756 Automation Parkway, San Jose, California 95131, U.S.A.
