Instruction manual

English 6

Using The Monitor

Installing / Changing The Batteries

1. Slide the battery cover to open it.

2. Remove the used batteries and insert

new batteries into the battery

compartment as shown, taking care that

the polarities (+) and (-) are correct.

3. Slide the battery cover to close it.

Use only R6P, LR6 or AA batteries.

CAUTION

Insert the batteries as shown in the battery compartment. If not, the device

will not work.

When

(LOW BATTERY mark)

blinks on the display, replace all batteries

with new ones. Do not mix old and new batteries. It may shorten the

battery life, or cause the device to malfunction.

(LOW BATTERY mark)

does not appear when the batteries are drained.

Battery life varies with the ambient temperature and may be shorter at low

temperatures.

Use the specified batteries only. The batteries provided with the device are

for testing monitor performance and may have a limited life.

Remove the batteries if the device is not to be used for a long time.

The batteries may leak and cause a malfunction.

The stored data are cleared when the batteries are removed or drained.

Connecting The Air Hose

Insert the air connector plug into the air

socket firmly.

Connecting The AC Adapter

Insert the AC adapter plug into the DC jack.

Then, insert the AC adapter into an

electrical outlet.

The AC adapter, the model TB-233, is

sold separately.

Step 3

Step 1

Step 2

ir connector plug

Air socket

C adapter plug

ack