Digital Blood Pressure Monitor Model UA-855 Instruction Manual Original Manuel d’instructions Manual de Instrucciones Manuale di Istruzioni Bedienungsanleitung 使用手冊 1WMPD4001742C
Contents Dear Customers .................................................................................... 1 Preliminary Remarks.............................................................................. 1 Precautions ........................................................................................... 2 Parts Identification ................................................................................ 3 Symbols ...................................................................................
Precautions Precision components are used in the construction of this device. Extremes in temperature, humidity, direct sunlight, shock or dust should be avoided. Clean the device and cuff with a dry, soft cloth or a cloth dampened with water and a neutral detergent. Never use alcohol, benzene, thinner or other harsh chemicals to clean the device or cuff. Avoid tightly folding the cuff or storing the hose tightly twisted for long periods, as such treatment may shorten the life of the components.
Parts Identification START Button (Orange illumination during the AM) (Blue illumination during the PM) Display Air Connector Plug LED window Arm Cuff Air Socket Air Hose User selector switch Clock Button AM/PM Button Graph Button MEMORY Button Button Battery Compartment Battery Cover 1.5V Batteries (R6P, LR6 or AA) DC Jack Part of Display MEMORY User 1, 2 Alarm ON/OFF mark Histogram WHO Classification I.H.B.
Symbols Symbols Function / Meaning Recommended Action Standby and Turn the device on. Battery installation guide Direct current SN Serial number Date of manufacture Type BF: Device, cuff and tubing are designed to provide special protection against electrical shocks. The indicator that appears while measurement is Measurement is in progress. in progress. It blinks when the pulse is detected. Remain as still as possible. Irregular Heartbeat indicator. (I.H.B.
Operation Mode 1. Normal Measurement Press the START button. Blood pressure is measured and data is stored within the device. The device can store the last 120 sets of data in memory for each user. 2. Recalling The Data Press the MEMORY button to recall the data. The average data of all the measurements is displayed, as indicated in the figure at the right. Press the AM/PM button to recall the average data during the AM or PM. Press the button to display each measurement.
Using The Monitor Installing / Changing The Batteries 1. Slide the battery cover to open it. 2. Remove the used batteries and insert new batteries into the battery compartment as shown, taking care that the polarities (+) and (-) are correct. 3. Slide the battery cover to close it. Use only R6P, LR6 or AA batteries. Step 2 Step 1 Step 3 CAUTION Insert the batteries as shown in the battery compartment. If installed incorrectly, the device will not work.
Using The Monitor Press and hold Adjusting The Built-in Clock Adjust the clock prior to use as necessary. 1. Press and hold the Clock button until the year starts blinking. 2. Select the year using the button. Press the Clock button to set the current year and move to month/day selection. The date can be set anywhere between the years 2006 and 2056. Year Month 3. Select the month using the button. Press the Clock button to set the current month and move to day selection. Day 4.
Using The Monitor Alarm ON/OFF Mark On The Display When the alarm is on, a “ ” appears on the LCD. To turn the alarm off, simply press the Clock button once. The alarm will sound for 1 minute. To stop the alarm sound, press any button once. Selecting The Correct Cuff Size Using the correct cuff size is important for an accurate reading. If the cuff is not the proper size, the reading may yield an incorrect blood pressure value. The arm size is printed on each cuff. The arm cuff is a consumable.
Using The Monitor How To Take Proper Measurements For the most accurate blood pressure measurement: Sit comfortably on a chair. Rest your arm on the table. Do not cross your legs. Keep your feet on the floor and straighten your back. Relax for about five to ten minutes before measurement. Place the center of the cuff at the same height as your heart. Remain still and keep quiet during measurement. Do not measure immediately after physical exercise or a bath.
Measurements Model UA-855 is designed to detect the pulse and to inflate the cuff to a systolic pressure level automatically. If your systolic pressure is expected to exceed 230 mmHg, read "Measurement With The Desired Systolic Pressure" on the next page. Normal Measurement 1. Set the User selection switch to either User 1 or User 2. 2. Place the cuff on the arm (preferably the left arm). Sit quietly during measurement. 3. Press the START button.
Measurements Measurement With The Desired Systolic Pressure If your systolic pressure is expected to exceed 230 mmHg, use this procedure. 1. Place the cuff on the arm (preferably the left arm). At heart level 2. Press and hold the START button until a Press and hold number about 30 to 40 mmHg higher than your expected systolic pressure Release the button appears. at the desired 3. Release the START button to start measurement, when the desired number is reached.
Recalling Memory Data Note: This device stores the last 120 measurements in memory for each user. 1. Press the MEMORY button. Press the MEMORY button 2. The average data of all the measurements and the number of data are displayed. Then, each time the button is pressed, the memory data is displayed from the most recent. After the last data is displayed, the display returns to the clock display. 3.
Recalling Memory Data For details on memory data recalling procedure, refer to the chart below. Clearing The Memory Data In the clock display, press and hold the MEMORY button until the “ (memory) mark blinks to clear the stored data.
Displaying Histogram Data A histogram is a graph showing the frequencies of the systolic values or diastolic values as appear in the WHO classification. What data is to be displayed in the histogram is selected below. What Data Can Be Displayed In The Histogram ALL 1wk 1mon. ALL/AM ALL/PM 1wk/AM 1wk/PM 1mon./AM 1mon./PM All the data in memory All the data for last 7 days All the data back to the same date of the previous month (if the date does not exist, one day before the date).
Displaying Histogram Data Press the Graph button Displaying The Histogram 1. Press the Graph button. 2. The histogram and the average data of all the measurements are displayed. Then, each time the button is pressed, the Y-axis switches between SYS (systolic blood pressure) and DIA (diastolic blood pressure). 3. When the histogram data of all the measurements is displayed, press the AM/PM button to display the histogram and the average data of the measurements taken during the AM.
What Is An Irregular Heartbeat Model UA-855 blood pressure monitor provides a blood pressure and pulse rate measurement even when an irregular heartbeat occurs. An irregular heartbeat is defined as a heartbeat that varies by 25% from the average of all heartbeats during the blood pressure measurement. It is important that you be relaxed, remain still and do not talk during measurements. Note: We recommend contacting your physician if you see this indicator frequently.
About Blood Pressure What Is Blood Pressure? Blood pressure is the force exerted by blood against the walls of the arteries. Systolic pressure occurs when the heart contracts. Diastolic pressure occurs when the heart expands. Blood pressure is measured in millimeters of mercury (mmHg). One's natural blood pressure is represented by the fundamental pressure, which is measured first thing in the morning while one is still at rest and before eating.
Troubleshooting Problem Nothing appears on the display, even when the power is turned on. The cuff does not inflate. Possible Reason Batteries are drained. Battery terminals are not in the correct position. Battery voltage is too low. (LOW BATTERY mark) blinks. If the batteries are drained completely, the mark does not appear. The cuff is not applied properly. You moved your arm or body during the measurement. The device does not measure. The cuff position is not Readings are correct.
Maintenance Do not open the device. It uses delicate electrical components and an intricate air unit that could be damaged. If you cannot fix the problem using the troubleshooting instructions, request service from your dealer or from the A&D service group. The A&D service group will provide technical information, spare parts and units to authorized dealers. The device was designed and manufactured for a long service life.
Ingress protection Device: IP20 Carrying case: IP01 Applied part Cuff Useful life Device: 5 years (when used six times a day) Cuff: 2 years (when used six times a day) Accessory AC adapter The adapter is to connect the blood pressure monitor to a power source at home. TB-233 Please contact your local A&D dealer for purchasing. The AC adapter is required to be inspected or replaced periodically.
1-243 Asahi, Kitamoto-shi, Saitama 364-8585 JAPAN Telephone: [81] (48) 593-1111 Fax: [81] (48) 593-1119 A&D INSTRUMENTS LIMITED Unit 24/26 Blacklands Way, Abingdon Business Park, Abingdon, Oxfordshire OX14 1DY United Kingdom Telephone: [44] (1235) 550420 Fax: [44] (1235) 550485 A&D ENGINEERING, INC. 1756 Automation Parkway, San Jose, California 95131 U.S.A.