Precision Health Scale Instruction Manual Mode d'emploi 1WMPD4002731 Manuale d’uso Italiano Bedienungsanleitung Deutsch Manual instructivo Español Français English UC-355PBT-Ci
Contents Startup Guide ............................................................................................. 1 Safety Precautions..................................................................................... 2 Wireless Communication Function .......................................................... 3 Accessories ................................................................................................ 3 Parts Names .......................................................................
Startup Guide Get Started Install the batteries (P.5) Pair with a receiver (P.6) Measure without pairing with a receiver (P.7) Set the Unit (P.8) Measuring (P.9) Step on the scale Confirm that StEP and oFF are alternately displayed Step off the scale Confirm your weight kg ※ Data is transmitted. Data is stored in the scale if there is no receiver. (P.11) ● Receivers can also be unpaired. (P.
Safety Precautions The following items contain information to prevent the risk of harm or injury to yourself or other people. Please read these items carefully and be sure to use this product correctly. Danger This symbol indicates "an immediate danger which could result in death or serious injury". Warning This symbol indicates "the possibility of death or serious injury". Caution This symbol indicates "the possibility of physical injury or damage to property".
Wireless Communication Function This scale uses the Bluetooth wireless to communicate with a receiver device. At the end of measurement, the measurement data is automatically sent from this scale to the receiver device. Bluetooth is communication technology that enables devices to communicate wirelessly. For details on Bluetooth, see "Scale Communication (P.12)".
Parts Names Scale Battery compartment (ON OFF/Setting) Switch Feet Feet Handles Display Section Stable Symbol Bluetooth Communication Symbol Unit Battery indicator Display Symbols Display Section Symbol ○ Name Description This symbol is displayed when the measurement display is stable. Ready/Stable symbol The normal battery power indicator with charge remaining. Battery indicator ↓ ↓ Low battery indicator If this symbol is displayed, replace all four batteries with new ones.
Installing (or Replacing) the Batteries 1. Open the battery compartment cover on the underside of the scale. 2. Install four new AA size alkaline batteries with the positive (+) and negative (-) terminals properly aligned with the corresponding symbols in the battery compartment. 3. Close the battery compartment cover. The scale switches to pairing mode when batteries are installed. To pair the scale with a receiver, see "Registering with a Receiver (Pairing) (P.6)".
Registering with a Receiver (Pairing) This scale needs to be registered with a receiver in order to use Bluetooth communication with the receiver. The process of registering this scale with a receiver is known as pairing. When pairing is completed, measurement data from this scale is automatically sent to the paired device each time a measurement is made when the receiver is in the state in which it can receive transmissions. Consult the receiver instruction manual and set it to enable pairing.
Skip Registering with a Receiver (Pairing) 1. Install four AA size alkaline batteries into this scale. For details, see "Installing (or Replacing) the Batteries (P.5)". 2. Press the Press the switch when "Pr" is displayed. switch to turn the power off. ※ You can also measure your weight by simply stepping on the scale when "Pr" is displayed.
Setting the Unit 1. Confirm that the scale is turned off, and press and hold the switch. When the switch is continuously pressed, "unit" and "uPr" are alternately displayed. 2. ≪♪Beep≫ ≪♪Beep≫ Release the switch when "unit" is displayed. The display changes from "unit" to display the unit that is currently set. kg 3. Press the switch to select the unit that you want to set. kg The unit changes each time the switch is pressed. Wait for 3 seconds after setting the unit. 4.
Measuring Your Weight Step On Weighing 1. Confirm that the scale is turned off, and step on the scale gently. Measurement starts when you step on the scale. A progress bar is displayed during measurement. Stand up straight and remain as still as possible during measurement. 2. ≪♪Beep≫ ≪♪Beep beep beep≫ Step off the scale when "StEP" and "oFF" are alternately displayed with three beeps. If you do not step off, the scale beeps every two seconds. The scale turns off automatically after 2 minutes.
Measuring Your Weight on a Carpet Place the scale on a solid level surface, such as tile, wood, or laminate flooring. If the scale must be used on a carpet, be sure to use the supplied tray. 1. Place the supplied tray on the carpet. 2. Place the scale onto the tray in line with the illustration on the tray. Set the scale so that sides of the scale do not touch the tray. You may not be able to accurately measure your weight in some cases. 3. Measure your weight.
Other Functions Unpairing 1. Confirm that the scale is turned off, and press and hold the switch. When the switch is continuously pressed, "unit" and "uPr" are alternately displayed. 2. Release the switch when "uPr" is displayed. 3. Confirm that "End" is displayed. ≪♪Beep≫ ≪♪Beep≫ ≪♪Beep beep≫ The receiver is unpaired. If "E-10" or "E-11" is displayed, perform the unpairing procedure again from step 1. The scale turns off automatically.
Scale Communication This scale is equipped with a Continua certified Bluetooth wireless communication function. Measurement data can be transmitted by connecting to a Bluetooth device that is compatible with Continua connection specifications. Devices that are Continua certified carry the Continua logo mark. Bluetooth devices carry the Bluetooth logo mark. For details on pairing this scale with a receiver that is equipped with Bluetooth, see "Registering with a Receiver (Pairing) (P.6)".
Specifications Model UC-355PBT-Ci Maximum capacity 250 kg / 550 lb Minimum display 0.1 kg units from 0 to 100.0 kg 0.2 kg units from 100.0 to 250.0 kg 0.2 lb units from 0 to 220.0 lb 0.5 lb units from 220.0 to 550.0 lb Communication method Bluetooth Ver.2.1 class 1 SSP HDP Compatible Setting Items Units: kg or lb Power source Four AA size alkaline batteries Battery life Approx.
Before Requesting Service Symptoms Corrective Action E is displayed Exceeds the maximum capacity (250 kg / 550 lb). E-0 is displayed Exceeds the maximum capacity (250 kg / 550 lb). Err is displayed Exceeds the maximum capacity (250 kg / 550 lb). E-10 is displayed Pairing or unpairing has not completed correctly. Remove and reinstall the batteries.
1-243 Asahi, Kitamoto-shi, Saitama 364-8585 JAPAN Telephone: [81] (48) 593-1111 Fax: [81] (48) 593-1119 A&D INSTRUMENTS LIMITED Unit 24/26 Blacklands Way, Abingdon Business Park, Abingdon, Oxfordshire OX14 1DY United Kingdom Telephone: [44] (1235) 550420 Fax: [44] (1235) 550485 A&D ENGINEERING, INC. 1756 Automation Parkway, San Jose, California 95131 U.S.A.
