Specifications

WARNING!
Before you start your new MP-2A Series True Tube Microphone preamp
please read the following:
ANY real tube product is sensitive to a high SPL environment. This may cause
microphonics in a recording situation. Make sure you are able to shock
mount and or place the unit in isolation if need be. Direct light will also effect
tubes, as well.
PLEASE, be sure to have at least one rack space between any tube products
from the product above and below the unit. This will ensure your tube unit will
not over heat. Over heating will cause damage to the tubes and shorten their
life span. If possible place, the MP-2A Series unit in the top rack space to
allow air flow.
If you have received your unit via UPS/Fed-Ex/DHL, or any other courier, your
MP-A should have been double boxed for protection. If it was not double
boxed, please contact your dealer and return the unit to them for a
replacement.
We demand ALL our units to be double boxed to help prevent damages during
shipping.
Thank you,
Peter Montessi
President
A Designs Audio LLC