Use and Care Manual

Stereo system with subwoofer – line-level connection
If you’re using a separate stereo preamp and amplifier (or if your integrated amp or stereo receiver
has line-level outputs and inputs for an external processor), you can (and should) use a line-level
connection to the subwoofer and back to the amplifier. With this setup, you can connect your
Micro SEs or A’Diva SEs directly to the amplifier, because the subwoofer’s high-pass filter will make
sure the speakers don’t get deep bass signals.
How to connect a stereo preamp and amplifier to a subwoofer using line-level inputs and outputs and a pair of Micro
SEs or A’Diva SEs.
9