Use and Care Manual

2
What’s inside
2 The technology inside Micro SE and A’Diva SE speakers
3 Mounting options
4 Using a subwoofer
5 Speaker positioning
7 Connections
11 Specifications / For more information
The technology inside Micro SE and A’Diva SE speakers
The Micro SE and A’Diva SE are the result of a 15-year effort by Anthony Gallo Acoustics to create
the ultimate compact, full-range driver. After trying countless combinations of materials, we settled
on an aluminum laminated, cellulose-polymer honeycomb diaphragm which is extremely stiff yet
extraordinarily light. The high-frequency response of these drivers extends far higher and with a
much wider dispersion pattern than almost any other full-range speakers we have ever encoun-
tered.
Because these drivers cover the full range from the upper bass to the highest treble, all of the
sound emerges from a single point. Also, there’s no crossover required because the speaker doesn’t
need a separate woofer and tweeter.
The new SE series incorporates our OPT (Optimized Pulse Technology), because it delivers an almost
perfectly clean pulse response—which translates to a near-total lack of audible timing errors and
tonality shifts that plague most conventional speakers.
Both speakers incorporate our S2 damping control pods that banish ear-fatiguing colorations and
enclosure resonances. The result is an incredibly clean, natural sound, with an enveloping, 3D
sound stage that every listener in the room can hear