2.4G Wireless Keyboard User Manual Model: GX-100 www.a4tech.
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION. Federal Communications Commission Requirements The equipment has been tested and found to comply with the limits for Class B Digital Device, pursuant to part 15 of the FCC Rules.
Pair the Keyboard with "A4Tech G-Family" 1. Plug the multi-link receiver of A4Tech G3/G5/G7/G9/G10 Series to your computer. (Note: To ensure that the wireless keyboard range among 15 meters, please connect the multi-Link receiver to your computer with USB extension cable at a far location to prevent electromagnetism interference.) 2. Install A4Tech" G-Family" software 1). Get A4Tech" G-Family" software from http://www.a4tech.com/Pairing.asp to start installation. 2).
Notice: To ensure that your keyboard sends and receives perfectly, please read below instructions for your reference: 1 Avoid Interference from iron panel of PC. Please plug the multi-link receiver into USB Ports. 2. Use USB extension cable to position the Multi-link receiver at a far location to prevent electromagnetism interference from devices 3. Avoid using the wireless keyboard on a metal surface.