User's Manual
[B-Strafe]:
Setupbullet
numbers
SetupbulletnumbersperStraferun.
Sightreturn Ifoffsets areaddedin HEADSHOTgun adjustments, after theshooting cycle is completed, you may
decidetoreturnthesighttothe“firstshot”position.
Non‐return:Remaininthelastshotposition,nocompensationisadded.
Return:Returntothefirstshotpositionwithcompensation.
Ballistic
cycle
Ballisticcycle:Atypical[B‐Strafe]modeusuallyconsistsoneofmain shootingcycleandfollowedby
manyrepetitiveloopcycles.
Example:
Maincycleconsistsof6shotsfrom1stto6th.
Loop cycle consists of 4 shots from 3rd to 6th of the main
cycle, and then repetitively circulates the loop, e.g., in the
sequenceof7thto 10th shotÆ 11th to14thshot Æ 15th to
18thshotÆ…etc.
Example: In the [B‐Strafe] mode, setup the main and loop cycles with 150ms time intervals on the last 5th
shot. Results: press and hold the L‐Key, the [B‐Strafe] will perform below shooting sequenceswith
150msineachloopshootingcycle.
Interval150msinterval150ms
….