Enjoy Hi-Fi music beyond boundary! User’s Guide Model : RHP-7 www.a4tech.
Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
●Noise Filter Function ●Charge Output Jack for Headphone Charging ●Audio-In Jack for Audio Cord connecting Audio Source,ideal choice for all types of music and TV applications ●Power On Indicator: Green LED Light INTRODUCTION The 3D Stereo Wireless Headphone is of the latest wireless technology. Its 3 Channel FM Stereo Technology enables emitting signals travel easily through walls and floors, delivering high-quality stereo sound effect.
INSTALLATION OF TRANSMITTER back of TV, CD, VCD, DVD. Then insert the red and white RCA plug ends into the equipment jacks marked "Audio Out " to make the audio source connection. Note: The Noise Fitter has the effect merely to Audio Socket A. 1) Connect the supplied AC/DC power adapter to an electrical power source or wall outlet. 2) Plug the AC/DC power Adapter into the DC jack located on the rear of the transmitter.
with Both battery’s positive(+) side on top. 3) Replace the cover and your headphone is ready to use. Battery Door OPERATION HOW TO CHARGE ● Turn on your audio source (computer or other audio source) to which the transmitter is connected. ● The Wireless headphone is auto working ON when you ware it(The switch adjuster is auto TUNE ON). ● Power Indicator “Green” light on, the battery is on use. ● Place the headphone on your head and adjust the headband to comfortably fit your head and ears.
Carrier Frequency: 912-914 MHz Operating Voltage 1: 2.4V 2 ×AAA Ni-MH Operating Voltage 2: 3.0V 2 ×AAA alkaline Frequency Response: 20Hz – 20KHz Signal Noise Ratio: ≧55 dB Distortion: 1.5% Channel Separation: ≧30 dB Operation Maximum: 52M (in open space w/o boundary) NOTE: Changes or modifications not expressly approved by the party responsible for compliance to the FCC Rules could void the users authority to operate this equipment.
the volume of the audio source equipment.
