User's Manual

4
with Both battery’s positive(+) side on top.
3) Replace the cover and your headphone is ready to
use.
HOW TO CHARGE
● Connect the supplied power cord to the charge out
port located on the rear of the transmitter.
● Place the headphone receiver on the transmitter
stand at their correct position and ready to
auto-charge.
● Power off indicator light “Red” on is a signal for
low battery and required charging.
● Power off indicator light “Red” off is a signal
for full battery and ready to use.
OPERATION
● Turn on your audio source (computer or other audio
source) to which the transmitter is connected.
● The Wireless headphone is auto working ON when you
ware it(The switch adjuster is auto TUNE ON).
● Power Indicator “Green” light on, the battery is
on use.
● Place the headphone on your head and adjust the
headband to comfortably fit your head and ears.
● Select a perfect Channel for reception: CH1 CH2
or CH3
● Tune the frequency adjustment control wheel
located
on the right headphone’s rear part until the Stereo
Indicator with “Red” light on, Stereo sound is
available on its best reception.
● Tune the Volume Control to your desired listening
level.
● Switch the Noise Filter which on transmitter to
ON to delete uneasy noise.
Battery Door