User's Manual

7
GETTING STARTED
1. Before first use, charge your
plug for approximately 2 hours.
The USB charging cable can
be plugged into any USB port
or USB/AC power adapter (not
included)
• Flashing Light = Charging
• Solid Light = Fully Charged
• Rapid Flashing Light = Low
battery, charge is needed
2. Wash your plug with soap and
water, or toy cleaner suitable for
use with silicone items.
FAQs can be found at
www.bvibe.com
Email us at
[e-mail]
for any unanswered questions
3. Lubricate your plug with
a water based, silicone
compatible lubricant.
4. Turn ON your plug by
pressing quickly at the
bottom of your plug.
The light will flash, indiciating
the power is on and in standby
mode.
Push again to use the
manual mode, or push
on the remote to pair
the remote & plug.
Once in use, the base light will
change from flashing to solid.
TOY CLEANER
LUBE