Instruction Manual

8 9
TONE INDICATORS
Operation LED Indicator Status Action
Power On
1 high beep
Press the power key for
1-2 seconds
Pairing
2 consecutive high beeps
Press the power key for 5-6
seconds (done from power
of mode)
Power Off
1 low beep followed by
1 high beep
Press the power key for
3 seconds
Pairing
Successfully
2 consecutive high beeps None
Call Receiving
Device ring tone
Press power key to
answer call
In Conversion
1 beep upon answering
Press power key to
answer call
PAIRING THE HEADPHONES
Your Untangled Pro Children’s Bluetooth Headphones can be used with
most electronic devices that support Bluetooth technology. For com-
puters, you may need to consult with your manufacturer to confirm the
Bluetooth driver is installed so the headphones can pair properly.
For computers, mobile phones, tablets, phablets and the like, you
should consult your user manual in order to find the Bluetooth settings
on your device.
Once you have confirmed that your device is able and ready to be
paired. Please follow these steps to complete the process:
1. Set your computer or other device into pairing mode by following the
device’s instructions to turn on Bluetooth.
2. With the headphones powered off, please press the power button
and hold it. The light will flash blue, red, red and then blue/red alter-
nating. Now it’s in pairing mode so please check your Bluetooth list on
the device for “Untangled Pro” and select it. The headphones’ LED will
flash blue to confirm successful pairing.
3. Now on your computer or device you should see the equipment
called “Untangled Pro” and once your select it, the pairing process will
be complete.