User manual
Running the Demonstration
XAPP794 (v1.3) December 20, 2013 www.xilinx.com 20
Using the Web-based GUI
To access the web-based GUI, open a web browser such as Internet Explorer and enter the
ZVIK IP address h
ttp://192.168.1.10 (or the address assigned in Preparing the SD Card). The
web page shown in Figure 17 appears.
If the host computer cannot establish a connection, it might be necessary to disable virus
scanning, the firewall, or both. This is not typically required. To test whether the computer can
communicate over the Ethernet connection, open a Command Prompt window (this is done in
Windows 7 by selecting Start Button > All Programs > Accessories > Command Prompt)
and type ping 192.168.1.10 or ping followed by the IP address assigned to the ZVIK in the
previous section. If this is not successful, review the IP configurations set in Preparing the SD
Card and Configuring the Host IP Address.
X-Ref Target - Figure 17
Figure 17: 1080p60 Camera Design Web-based GUI
;BB