User manual

Running the Demonstration
XAPP794 (v1.3) December 20, 2013 www.xilinx.com 4
Running the
Demonstration
This section describes how to run the 1080p60 camera image processing reference design on
the ZVIK.
Reference Design File
The reference design files for this application note can be downloaded from:
https://secure.xilinx.com/webreg/clickthrough.do?cid=199792
Tabl e 1 shows the reference design matrix.
Installing Design Files
Download the xapp794.zip files to the C: drive of the host PC:
C:\zc702-zvik-camera
Note:
The Windows operating system has a 260 character limitation on the maximum length for a path.
Make sure that the installation path is short to prevent path length related errors. If another location is
chosen, there should be no spaces in the folder names.
Table 1: Reference Design Matrix
Parameter Description
General
Developer name Xilinx
Target devices Zynq-7000 AP SoC
Source code provided Yes
Source code format VHDL (some sources encrypted)
IP used Video IP Cores
Simulation
Functional simulation performed N/A
Timing simulation performed N/A
Test bench used for functional and timing
simulations
N/A
Test bench format N/A
Simulator software/version used N/A
SPICE/IBIS simulations N/A
Implementation
Synthesis software tools/version used Vivado 2013.2 design tools
Implementation software tools/version used Vivado 2013.2 design tools
Static timing analysis performed Yes (pass timing in PAR/TRACE)
Hardware Verification
Hardware verified Yes
Hardware platform used for verification Zynq-7000 Video and Imaging Kit