User manual
Rebuilding the Hardware Platform
XAPP794 (v1.3) December 20, 2013 www.xilinx.com 45
4. The generated license file is sent by email. Follow the enclosed instructions to add the
evaluation license features for the Video and Image Processing Pack.
Build the Hardware Design Bitstream
1. Launch Vivado 2013.2:
• On a Windows host, select Start > All Programs > Xilinx Design Tools > Vivado
2013.2 > Vivado 2013.2
• On a Linux host, enter vivado at a command prompt.
2. From the Vivado welcome screen in the Tcl console, run these commands (see Figure 50):
cd C:/zc702-zvik-camera/hardware/vivado
source ./scripts/build_camera_design.tcl
The script w ill create a Vivado project called “zvik_camera_201 3.2,” including an IP Integrato r block diagram, then automat ically build the bit stream.
X-Ref Target - Figure 50
Figure 50: Vivado 2013 Tcl Console
;BB