Instruction manual

Note:

Only integer numbers are accepted for M. The exponent should equal 1 only for M > 9999.

8.3 Counting the Pulses

Whenever channel 8 is in the TRAIN mode, the display shows how many pulses still remain in the

existing TRAIN.

Press keys: ‘TRAIN,8,ENTER’.

Now trigger channel 8 manually

Press key: ‘8’.

Table 1. Parameters and Error Indication

Parameter Min Max Error indication for illegal

values.

(x is the channel number)

M 1 59,900 Mx Err

DURATION

40µsec

3999 sec Dx Err

DELAY

100µsec

Delay> Duration/10,000

3999 sec Lx

Err

INTERVAL

a)Normal usage:

b)Train Mode:

c)If the channel

internally activates

other channels:

60µsec

Interval> Duration + 9µsec

Interval> Duration + 59µsec

Interval >500µsec

3999 sec Ix

Err

Err (Rate err)

Err (Train err)

Err (Connect err)

Example: The message ‘R7 Err’ indicates ‘Rate error’ on channel #7. The reason is that the channel is

now running in FREE-RUN, GATE or TRAIN mode and the interval is shorter than the duration or at