Instruction manual

Example 3: To disconnect all outputs from channel #5 -
Press keys: ‘CONNECT,CONNECT,5,ENTER’
Example 4: To disconnect all inputs to channel #5 -
Press keys: ‘CONNECT,CONNECT,5,ENTER’
Example 5: To disconnect all inputs and all outputs from all channels -
Press keys: ‘CONNECT,CONNECT,ALL,ALL,ENTER’
9.3 External Inputs
In the modes: TRAIN, TRIG or GATE channels 1 and 2 can be triggered (gated) externally. EXT 1
activates only channel 1. EXT 2 activates only channel 2. (channels 1 and 2 can activate the other
channels internally).
The external input has to be in the range of 5 to 10V.
Note:
A computer can trigger each channel directly (‘manually’) via the RS-232 interface of Master-8-cp
(see Section 14).