Instruction manual

10. Eight Stored Paradigms
A paradigm specifies the modes and parameters of all the channels and their internal connections.
Master-8 stores eight different programmed paradigms. The changeover from one paradigm to another
is very fast (50 msec).
10.1 Transferring to another Paradigm
Example: To transfer to paradigm number 7 -
Press key: ‘ALL’ (the previous paradigm is displayed) ‘7, ENTER’.
You don’t have to worry about saving the old paradigm, each instruction is saved the moment you
insert it.
Note:
Transferring from one paradigm to another does not affect the clock, the stop-watch or the timer.
10.2 Copying Paradigms
Copying paradigms is very useful when you want a new paradigm with just some modification from a
present one. Instead of programming the whole new paradigm, you can copy the present one and just
modify it.
Example: In order to copy paradigm #6 -
Press keys: ‘ALL,2,6,ENTER’
Note the arrow sign (‘→’) for the source/target direction. Paradigm #2 is not affected by this
instruction.