Instruction manual

Appendix B - Setting the baud-
rate and character
format
1. A double press on ALL key shows the present baud rate. Each additional press on the
ALL key selects the next baud rate in the cycle:
110, 150, 200, 300, 600, 1200, 2400, 4800, 9600, 19200.
2. Pressing the ENTER key latches the selected baud-rate.
3. BITS PER CHARACTER: Each on the ALL key selects either 7 or 8 bits per character
(ASCII).
4. Pressing the ENTER key latches the number of bits per character.
5. PARITY BIT: Each press on the ALL key selects the next parity mode on the cycle: 0 -
no parity. 1 - odd parity. 2 - even parity.
6. Pressing the ENTER key latches the selected parity.
7. STOP BITS: Each press on the ALL key selects either 1 or 2 stop bits.
8. Pressing the ENTER key latches the selected number of stop bits.
9. Press CLEAR-DISPLAY.
Check that you selected the right setting by pressing: -
CHECK,ALL,ENTER.