Instruction manual

Outputs ‘2+3’, ‘4+5’ and ‘6+7+8’ are the summations of outputs ‘2+3’, ‘4+5’ and ‘6+7+8’
respectively. You can use these sockets for multi-level pulses (e.g. +/- pulses). The two switches add
the summations ‘2+3’ and /or ‘6+7+8’ to the ‘4+5’ output, resulting in the ‘4+5’ output delivering up to
7 pulse levels +GND.
2.2 Rear Panel
The rear panel contains the following components:
a. A switch to connect or disconnect the ground to/from the chassis. You can also use this switch to
reduce the noise level of the system.
b. An RS-232 interface to communicate with a computer (for the Master-8-cp and Master-8-VP
models).