Instruction manual

USE BY
#3 FREE-RUN duration. Interval none
#2 TRIG duration, delay #3
#4 TRAIN duration, interval, M #2 & #3
#5 DC none none
A special feature of Master-8 is the 3 multilevel outputs which you can use for multilevel pulses (e.g.
+/- pulses). These OUTPUTS are ‘2+3’, ‘4+5’ and ‘6+7+8’ respectively.
Close to the ‘4+5’ output there are two switches. You can use these switches to add the summations
‘2+3’ and/or ‘6+7+8’ to the ‘4+5’ output, thus the ‘4+5’ output can deliver up to 7 level pulses + GND.
Examples of outputs that you can obtain through the ‘4+5’ output are shown in Figure 3.
Figure 3.