Instruction manual

15
OPERATION
PICTURE-IN-PICTURE
Reset the operation panel to initial mode:

→
Move the Video Slider

fully to the A or B-bus position.

→
Press one of the A-bus selection buttons to select a source.

→
Press one of the B-bus selection buttons to select a source.

→
Press the PIP button

to put the unit into picture-in-picture mode.

→
The PIP mode can be selected by pressing

~

buttons:

Shows the picture-in-picture box at 1⁄2 size without the frame edge.

Shows the picture-in-picture box at 1⁄3 size without the frame edge.

Shows the picture-in-picture box at 1⁄4 size without the frame edge.

Shows the picture-in-picture box at 1⁄2 size with the frame edge.

Shows the picture-in-picture box at 1⁄3 size with the frame edge.

Shows the picture-in-picture box at 1⁄4 size with the frame edge.

→
Other PIP features

(3) PIP sizes selectable for sub-picture PIP channel.

The color of the edge can be changed by pressing background color select button

.

When you slide the video slide to the A-bus position PIP picture dissolves into back ground scene.

Sub-picture PIP channel may be placed into different positions using Joystick

.
No Border Border