Specifications

ptg
292
Capturing Tape-Based Media
4. Select Clip > Batch Capture.
A dialog box appears.
5. Confirm that “Offline media only” is selected. When this option is
selected, all selected clips that are offline will be captured.
6. Click OK.
If you have not inserted a tape into the tape deck, a dialog box will
prompt you to do so.
7. After a tape is inserted, click Mounted to tell the system that the cor-
rect tape is loaded and ready for capturing.
A confirmation dialog box opens.
8. Click OK to confirm the tape and deck entries.
Media Composer captures each clip from the tape, in the Start
Timecode order. If another source tape is needed, the system prompts
you for the tape. At the end of the batch capture process, a dialog box
notifies you that the process is complete.
NOTE Yo u c a n s t op t he
batch capture process at
any time by clicking the
Trash icon in the Capture
tool. If you do this, you
have the option to keep
or discard the clips cap-
tured to that point.
NOTE When “Offline
media only” isn’t selected
and some of the chosen
clips have media files, the
system deletes the media
files and recaptures new
media files.
NOTE If you insert the
wrong tape and Media
Composer finds the
required timecode, it will
capture from that tape,
which is certainly not
desirable.
Download from www.wowebook.com