Troubleshooting guide
Installing System Board Options 6-17
)LJXU H 6\ VWHP% DWWH U\DQ G% DWWHU\ 6RFNHW
5HSODFHWKHH[SDQVLR QFDUGFDJHDVGHVFULEHGLQ´5HSODFLQJWKH
([SDQVLRQ&DU G&DJHµLQ&KDSW HU
5HSODFHWKHFRPSXWHUFR YHUUHF RQQHFW \ RX UFR PSXWHUDQGS HULSKHUDOV
WRWKHLUSRZHUVRXUFHVDQGWXUQWKHPR Q
NOTE: After you remove and replace the cover, the chassis intrusion detector will
cause the following message to be displayed at the next system start-up:
ALERT! Cover was previously removed.
(QW HUWKH6\V WHP6HWXSSURJUDPF RQILUPW KDW WKHEDWWHU\LVR SHUDWLQJ
SURSHUO\DQGUHVHW&KDVVL V,QWUXVLR QWR1R W'HW HFWHG
See Chapter 2, “Using the System Setup Program,” for information on running
the System Setup program and resetting the Chassis Intrusion option.
Enter the correct time and date through the System Setup program’s Time and
Date options. Also, use the copy you made in step 1 to restore the correct set-
tings for other system configuration information. Then exit the System Setup
program.
NOTE: If a setup password has been assigned by someone else, contact your
network administrator for information on resetting the chassis intrusion detector.
7XUQRII\RXUFRPSXWHUDQGXQSOXJLW I RUDW OHDVW PLQXWHV
$IWHUWHQPLQXWHVSOXJLQWKHF RPSXWHUWXU QLW RQDQGHQW HUWKH6 \V
WHP6HWXSSURJUDP,IWKHW LPHDQGGDWHDUHVWLOOLQFRUUHFWVHHWKH
FKDSWHUWLWOHG´ *HWWLQJ+ HOSµLQ\R XU
'L DJQRVWLFVDQG7URXEOHVKRRWLQJ
*XLGH
IRULQVWUXFW LRQVRQREWDLQLQJWHFKQLFDODVVLVWDQFH
BATTERY
socket
battery