Instruction manual
55
Servicing should only be performed by a Qualied Service Agent
OPERATION BUTTON
The operation button displays the Burner Control running operation, including setpoint and ring rate values. From this page the user
can change setpoints, manually control the boiler/water heater’s ring rate, manually turn pumps on, view annunciation information,
and switch between hydronic heating loops (Central Heat and Domestic Hot Water), as shown in Figure 47. If a password is required
to change any of the settings on this page, the user can press the Login button to enter the password.
Annunciation information is shown in Figure 48 and Figure 49.
FIGURE 45. CONTROL EXPANDED LOCKOUT DETAIL FIGURE 46. CONTROL EXPANDED ALERT DETAIL
FIGURE 47. OPERATION PAGE
FIGURE 48. PROGRAMMABLE ANNUNCIATION FIGURE 49. PROGRAMMABLE ANNUNCIATION CONT.