Operation Manual

2
Read these installation instructions rst before installing the appliance. Carefully read the
user instructions before igniting the appliance. Failure to follow these instructions may lead
to risk of explosion and/or re and could cause material damage and/or bodily harm.
Installation and commissioning should be carried out by a qualied competent installer.
The type of gas and the value at which the appliance is set standard in the factory are
registered on the rating plate. The appliance may only be installed in a room if this room
meets the ventilation requirements.
A.O. SMITH ACCEPTS NO RESPONSIBILITY FOR WARRANTY, SERVICE AND/
OR PRODUCT LIABILITY IN CASE OF UNAUTHORIZED ALTERATIONS, PRODUCT
MODIFICATIONS OR REPAIR.