Technical Documents

ManualsBrandsA.O. Smith ManualsWater HeaterA.O. Smith Low NOx Power Burner Models

Commercial Gas Water Heaters

LOW NOx POWER BURNER MODELS

FEATURES

BTP and BTPV commercial water heaters offer precise

power burner performance for commercial applications,

plus the ﬂexibility of conventional atmospheric venting, sidewall venting or

direct venting. To help ensure optimum performance, A. O. Smith provides a FREE

professional start-up that is required on the BTP and BTPV models.

VENTING OPTIONS

BTP models designed for conventional atmospheric vertical venting.

Barometric draft regulating damper provided. Order Vent Kit Part # 9500007350.

BTPV models designed for horizontal atmospheric sidewall venting or direct venting,

using optional vent kits.

For sidewall venting order Vent Kit Part # 9500007229.

For direct venting order Vent Kit Part # 9910001005.

LOW NOx POWER GAS BURNER (NATURAL GAS ONLY)

Pre-mix design with internal Flue Gas Recirculation (FGR)

Safety features include internal blocked ﬂue sensor, separate pilot

system, internal thermal cutoff and anti-ﬂashback barrier

FULLY AUTOMATIC CONTROLS

Including safety shut-off, high-temperature limit control

Dual thermostat, adjustable from 120º F to 180º F

DRAFT EQUALIZING COMBUSTION CHAMBER

Patented dome system ensures optimum ﬂue loading and efﬁcient heat

transfer by balancing pressure inside combustion chamber

ASME TANK CONSTRUCTION ON ALL MODELS

Rated working pressure: 160 PSI

CSA CERTIFIED AND ASME RATED T&P RELIEF VALVE

GLASSLINED TANK WITH MULTIPLE ANODE RODS

For optimum protection against tank corrosion

FLAME INSPECTION PORTHANDHOLE CLEANOUT

For easy cleanout of sediment from tank bottom

HIGH ALTITUDE INSTALLATION

Adjustable air intake damper easily reset for high-altitude installation by

authorized start-up agent

CODES AND STANDARDS

Meets the thermal efﬁciency and standby loss requirements of the U.S.

Department of Energy and current edition of ASHRAE/IESNA 90.1

Complies with SCAQMD Rule 1146.2 and other air quality management districts with

similar requirements for low NOx emissions. The BTPV 540 and 650 meet the requirements of

SCAQMD 1146.2 of 14 ng/j or 20ppm and other districts having the same requirements. The

BTPV 740 meets code requirements for Texas and other areas of California requiring 30ppm.

WARRANTY

Factory Start-Up is required for activating warranty and assuring maximum operating

performance. Contact your local sales representative or Authorized Start-Up Agent to

arrange a FREE Certiﬁ ed Start-Up.

Three-year limited tank warranty

For complete warranty information, consult written warranty shipped with

water heater,or contact A. O. Smith

BTP(V)-540A

through

BTP(V)-740A

GAS-FIRED

Revised October 2012

Low Lead Content

250696_AOSCG11000.indd 1250696_AOSCG11000.indd 1 10/4/12 4:10 PM10/4/12 4:10 PM

Summary of content (2 pages)

PAGE 1
® Commercial Gas Water Heaters LOW NOx POWER BURNER MODELS BTP(V)-540A FEATURES BTP and BTPV commercial water heaters offer precise power burner performance for commercial applications, plus the flexibility of conventional atmospheric venting, sidewall venting or direct venting. To help ensure optimum performance, A. O. Smith provides a FREE professional start-up that is required on the BTP and BTPV models.
PAGE 2
Commercial Gas Water Heaters ® CAPACITY, INPUT AND RECOVERY BTU MODEL INPUT NUMBER PER HOUR Gallons or Litres RECOVERY-GALLONS PER HOUR AT 100°F TEMPERATURE FIRST RISE HOUR GPH TANK RATING or SIZE 100°F LPH 40°F 100°F 140°F RISE US. Gallons 85 583 GPH Litres 321.7 2206.7 US. Gallons 85 690 Litres 321.7 US. Gallons 85 778 Litres 321.7 2944.7 4°C 56° C 78°C 1309 523 374 8” WC Minimal Gas Supply Pressure Required For All Models! BTP 540A BTPV 540A 540,000 LPH 4954.6 1979.6 1415.