Operating Instructions and Installation Instructions

PHE 50 / 75 / 100 / 150 / 175 / 225 / 250 / 275
3
Platenwarmtewisselaar / Plate Heat Exchanger / Échangeur de Chaleur à Plaques
GENERAL
Read this installation instruction before installing the device. The installation and commissioning shall be done
by a recognised installer. The plate heat exchanger is used for exchanging heat. Thus hot fluid can warm up
cold fluid. On the other hand, fluid can be cooled by extracting heat from it.
The warranty period for the plate heat exchanger is two years from date of purchase.
DIMENSIONS
Dimen
-sion
Description Unit
PHE
50
PHE
75
PHE
100
PHE
150
PHE
175
PHE
225
PHE
250
PHE
275
A Overall height mm 337 337 337 337 337 337 337 337
E Depth mm 61 71 85 109 133 157 181 205
C Width mm 127 127 127 127 127 127 127 127
M Height between connections mm 281 281 281 281 281 281 281 281
N Width between connections mm 73 73 73 73 73 73 73 73
1 / 2 Water connections primary G1" G1" G1" G1" G1" G1" G1" G1"
3 / 4 Water connections secondary G1" G1" G1" G1" G1" G1" G1" G1"
IMD-0514 R0
1
2
3
4