Operation Manual

SQ-100
2. Press ‘’START’’ to start the training
3. You may press ‘’LAP’’ button to switch to next
training item directly.
4. When the all sessions finished, system will pop
message to ask to save training data.
7.3.3 DELTE ALL
You can delete all the training data stored in the
device.
8. NAVIGATION
8.1 ADD MAP MODE / REMOVE MAP MODE
[MAIN MENU] > [NAVIGATION] > [ADD/REMOVE MAP MODE]
You can use this feature to display or not display the
map mode. However, while the map mode is off, and
you execute "Return to start" or "GOTO" a waypoint,
the map mode will be turn on again.
If map mode was enable, Map information will
appear.
Page 33