Information

Corning Cabelcon ApS, Industriparken 10, DK-4760 Vordingborg, Denmark.
Tel: [phone] Fax: [phone] [e-mail]
www.cabelcon.dk
Corning
Cabelcon
Self-Install ™ with fin
g
er friendl
y
nut
The perfect choice for Do-It-Yourself and professional
installations
–
no special tools required!
The next generation of Cabelcon Self-Install™ is a unique quality product
developed for replacement of low quality screw-on connectors - often used
for home installations. Installation is easy, simple and more precise than
ever before.
Self-Install™ is easy to push on – but impossible to pull off. The connector is
automatically fastening to the cable as the connector is installed. It remains
fastened – also after dismounting from the unit.
Technical Data (Typical)
Operational to 3 GHz
Impedance 75 Ohm
Shielding Eff. 30-862 MHz 110 dB
Shielding Eff. 862-3000 MHz 90 dB
Transfer Impedance 5-1000 MHz <5 mOhm
Return loss@1000 MHz (typ) 37 dB
Return loss@3000 MHz (typ) 28 dB
IMD (3
rd
order@2x100mW) -120dBc
IMD (IP3 value) +80 dBm
AMP rating cable data
Max. Tensile strength (overall) 200 N
Detailed
datasheets available on re
q
uest
Ordering information
F-59 3.7 Self-Install Nitin 99909637
F-59 3.9 Self-Install Nitin 99909646
F-56 4.9 Self-Install Nitin 99909643-01
F-56 4.9W Self-Install Nitin 99909647-01
F-56 4.9 Q Self-Install Nitin 99909645-01
F-56 5.1 Self-Install Nitin 99909644-01
F-56 5.1W Self-Install Nitin 99909648-01
(W=Waterproof)
Installation
1) Strip the cable (6.5/6.5 mm) and pull back the braid.
2) Press the connector over the cable until the dielectric is
flush with the post interface. Pull back the cable.
3) Mount the connector/cable on the set-top box – and tighten
with a standard 11 mm/or ad
j
ustable hex wrench. Read
y
!
Operational to 3 GHz
Waterproof versions available*
Easy and safe installation in seconds
One-piece connectors – no loose parts
No compression or special tools needed
Plated with our unique Nitin-6™ plating
Unique Self-Install™ compression system
Professional quality and excellent performance
Simple instructions – can be installed by anyone
Fits many standard RG6/59 cables (3.9+4.9+5.1+4.9 Q)
*
An external rubber ring for interface sealing is strongly
recommended. Read more on next page.
1
2
3
1
6
.5
mm
/
6.5
mm
Use the Sel
f
-Install™ for
CATV, satellite receivers,
cable modems and other set-
top box applications. The
waterproof versions can be
used for any outdoor
application such as parabolic
dishes etc.
Rev. 251011