Instruction manual

-Page 15 –
© A.W. Communication Systems Limited 2004
Volume Adjustment - Handset
Press the [MENU] key to access the menu system. Use the [↓] key to move down the
menu to Handset volume. Press [MENU] to select this item then use [VOL UP] and
[VOL DN] to adjust volume level. When the desired volume is set, press [MENU] to
store the value. The display returns to the top level menu and the user has the choice
to scroll to another menu option, or press [CLEAR] to leave the menu system.
Volume Adjustment - Default loudspeaker volume
The default loudspeaker volume setting determines the volume level the loudspeaker
will operate at when the unit is powered up. Press the [MENU] key to access the
menu system. Use the [↓] key to move down the menu to "Dflt speaker volume".
Press [MENU] to select this item then use [VOL UP] and [VOL DN] to adjust volume
level. When the desired volume is set, press [MENU] to store the value. The display
returns to the top level menu and the user has the choice to scroll to another menu
option, or press [CLEAR] to leave the menu system.
Keypad beeps
The keypad can emit one of two sounds, click or beep, or can be made silent. Press
[MENU] to access the menu system, then press [↓] until the chevron points to keypad
beeps. Press [MENU] to select this item then use the [↓] or [↑] and place the chevron
next to your choice {Pip, Click, or Off}. Press [MENU] to store your selection, then
[CLEAR] to exit the menu system.
Set Time
Press [MENU] to access the menu system, then [↓] until the chevron points to Set
Time. Press [MENU] to select this item. The display will now expect you to enter two
digits for the hour. Pressing clear will backspace and clear a digit at a time should you
wish to re-enter the numbers. Use the alpha-numeric keypad to enter the hour figures
then press [MENU] to store the numbers entered. Now the display will move down
and invite you to enter two digits for the minutes. Enter two digits then press [MENU]
to store your selection, and the display will move back to the menu option “set time”
press [CLEAR] to exit the menu system.
Set Date
Press [MENU] to access the menu system, then press [↓] until the chevron points to
set date. Press [MENU} to select. The display will change and expect you to enter two
digits for the day number. Enter two digits then press [MENU] to store your choice,
and then enter two digits for the month number and press [MENU] to store your
choice, and finally, enter two digits for the year and press [MENU] to store your
entry. Press [CLEAR] to exit the menu system.
Display Contrast.
To adjust the display contrast, press [MENU] to access the menu system, then [↓]
until the chevron points to Display Contrast. Press [MENU] to select this item, then