Instruction manual

-Page 21 –

Location Call - Selcall

If the mobile is equipped with a GPS location receiver, then it can be interrogated for

a location without driver intervention. Enter the identity number of the desired

mobile, then press [LOC]. A special selective call is issued to the mobile which will

respond without alerting the driver, and send location data.

Interrogate Call – Selcall

To interrogate a remote mobile resource for its current selcall status, the [INT] key is

used instead of the call key. The operation is the same as for the location facility.

Clear Function

The [CLEAR] key is used to remove identity numbers from the display if an error is

made during the identity number entry.