Specifications

Part 1, Installation and Configuration.
Forward
Thank you for purchasing the DRC-1 desktop radio control unit. If used within the guidelines
specified herein, the unit will provide trouble free operation without the need for service or
repair.
Repair Philosophy.
The DRC-1 has been designed using the very latest microprocessors and employs specially
written and tuned DSP software. Should the unit appear not to function properly, double
check the programming parameters you have set. It may also be worth checking the user
feedback file (if any) online at http://www.toneremote.com. This will aid fault identification
and correction.
Please note: The DRC-1 has no internal adjustments and there are no user repairs possible to
the unit. A.W. Communications employ special to type test jigs and diagnostic software to
calibrate and repair the units. Users who choose to open up the DRC-1 invalidate the warranty
issued when the unit was purchased.
We offer a range of service contracts for all of our product range, please contact our sales
department for full details.
The unit is sold under our standard terms and conditions and will carry a full twelve months
warranty subject to proper use and installation.
Please take the time to register your unit at http://www.toneremote.com and receive your
password to access the software support section of the web site.
When seeking technical support, you may be asked for the installed software version number.
Please see menu descriptions, which instruct how to read the software version number.
Unpacking and unit identification.
Within the carton (single Package) you should find:-
The main body of the control unit
The telephone handset.
The telephone handset connecting cord.
The modular power supply unit.
The power supply unit cord terminated in a 13 amp plug (fused at 5amp) UK only
Telephone interface cable
A line interface cable