User guide

© A.W Communication Systems Limited 2008
Page 18 of 34
Selcall Button
Clicking on the Selcall button will open up the Selcall signalling window in the centre of the
operators screen.
From this screen the operator can make an individual Selcall to a specific radio. Using the
keypad the operator keys in the users identity digits, these are displayed in the identity
window, once the correct numbers are input the operator can either select a specific site by
clicking on the site name in the TX Site window and then initiate the call or he can go straight
to initiating the call in auto site mode.
To clear an incorrectly entered digit, click on the left arrow button or press the clear button
to clear all of the entry.