User guide

© A.W Communication Systems Limited 2008
Page 20 of 34
Volume Button
Clicking on the Volume Button will open up the volume setting window in the central area of
the operators screen.
From here the operator can set the volumes independently for the headset, handset and
loudspeaker that are connected to the DRC-32 control unit. A numerical indicator
underneath each volume control shows the current level the volumes are set at.
The operator can change the volume levels by sliding the appropriate slider up and down to
get the necessary level of received audio.
Again the Exit button is used to remove the volume control window from the operators
screen and return the display to normal operation.