User guide

Page 21 of 34

Playback Button

Clicking the playback button will open up the instant replay recorder window in the centre

area of the operators screen.

The playback window shows a black box with a graphical representation of the recorded

speech. This box is calibrated in minutes back from the current system time. Within the box

is a white cursor which can be scrolled from left to right across the screen to select the

sample of recording at the time that the user wishes to listen to.

A small box to the right of the time graticule shows the time in minutes that the curser is set

to relative to the current time of the system.

If the operator wishes to listen to a section of recorder audio, they slide the cursor to the

appropriate location and then click on the “Play” button.

To stop the playback the operator clicks on the “Stop” button.