User guide

© A.W Communication Systems Limited 2008
Page 24 of 34
Channel
The radio channel on which the call was received.
Site
The radio site on which the call was received.
Calls are placed on the stack in chronological order with the oldest call being at the top of
the stack. If a radio sends in an alarm message this is automatically placed at the top of the
stack and the background to the call details is highlighted in red.
Calling a Radio from the Stack
To initiate a call to a radio which is currently stored in the stack, the operator simply clicks
on the line of the stack containing the individual call. The call is then removed from the stack
and placed in the current call box of the operators screen.
If the system is set to automatically call from the stack, then a Selcall “Call” message will
automatically be generated as soon as the call details are placed in the active call box.
If the system is set to just remove the call from the call stack, the operator will need to press
a further button to carry on with the call.
Call Button
This will initiate a Selcall call command to the radio alerting the radio user and enabling the
radio loudspeaker.
Reset Button
This will initiate a reset message to the radio detailed in the current call box and will close
down the radio loudspeaker.