User guide

Page 25 of 34

Clear Button

This will clear the call details from the current call box and will not initiate any Selcall

messaging.

Retain Button

This will take the call details from the current call box and place the details back into the

stack so that the operator can deal with the call at a later time. Calls placed back into the

stack are highlighted in yellow to indicate that they are retained calls.

Current Call Box

This box holds the details of the call currently being handled by the operator. It also can

show the status of the radio indicating to the operator that a call request to the radio has

been successful or has failed.

Where circulating site Selcall is used with a voting system the Current call box can also show

on which sites the system is trying to establish a call with the radio.

Main Screen Exit Button

This button is used to close down the DRCops application and to revert to the computers

normal operating system. A dialogue box will pop on the screen if this button is clicked

asking the operator for confirmation that they wish to exit from DRCops.