Installation guide

1212
4 Settings (continued)
English
4.3.4 Analogue mode (cont)
It is possible to select scaling of the
picture format to fit with connected
TV sets. This is handled in the
[Video conversion] drop down list
where it’s possible to choose
between the different types. [Video
WSS] (Wide Screen Signalling) is
available in the video for signalling
of the aspect ratio to be displayed by
the TV sets.
[Bitrate] can be set and this sets the
bitrate at the ASI output.
NOTE! Refer to the table in page 17
about correct values.
[Radio Channel OSD] gives you the
possibility to display the name of a
radio channel on connected TV
sets. You can choose Bg colour
(background colour) and Text colour
of the Radio channel name.
[Attenuation] can be chosen from
0 to -31 dB
You can select output [Channel
name] (E2 to E69) or [Frequency]
within steps of 1 kHz (e.g. 306,167
MHz) in all three output modes
(Analogue, COFDM or QAM).
Click [Set] to save settings.
QAM mode (SW option)
When selecting [QAM] DVB-C
output, there are settings for Output
channel (E2 to E69) or Frequency,
QAM mode (16, 32, 64, 128 or
256QAM), Baud rate (kBaud) and
Output signal attenuation
(0 to -31dB). Click [Set] to save
settings.
NOTE! Some of the choices needs
optional software to be uploaded
before they can be selected.