User Manual

Module Specification
NO. AT2530A
TITLE:
Module, ZigBee, 14.9 x 21.9 x 2.65mm, 45 I/O, Edge Castellated, SMD
REVISION DATE: 22 May 2013 ISSUE: O PAGE: 22 of 28
Appendix A: ZigBee Light Link
The ZigBee Light Link ZLL devices are divided into two categories:
• Lighting devices (Target): These are used in ZLL light nodes such as a lamp.
• Controller devices (Initiator): These are used in ZLL controller nodes such as a remote
control unit.
Ordering Information
Module Description
AT2530A_LB Module with integrated antenna, pre-programmed as Light Link Target
AT2530A_LR Module with integrated antenna, pre-programmed as Light Link Initiator
Lighting Link Target Reference Module Pin-Out
Module Pin Pin Name Pin Type Description
1 GND GND Ground
2 GND GND Ground
3 GND GND Ground
4 GND GND Ground
5 VDD Power 2.0V - 3.6V Power Supply
6 GND GND Ground
7 GND GND Ground
8 GND GND Ground
9 GND GND Ground
10 P2_4/XOSC32K_Q1 Digital I/O, Analog I/O Port2.4/32.768 kHz XOSC
11 P2_3/XOSC32K_Q2 Digital I/O, Analog I/O Port2.3/32.768 kHz XOSC
12 GND GND Ground
13 P2_2 Digital I/O Port 2.2 - DC (debug clock)
14 P2_1 Digital I/O Port 2.1 - DD (debug data)
15
P2_0/
ZLL_FUNC
Digital Input
Use to trigger the following events:
1. Input Pulse < 1 sec: Permit join for
60 secs