User Manual

Module Specification
NO. AT357HPA
TITLE:
Module, ZigBee, 17.9 x 24.9 x 2.75mm, 51 I/O, Edge Castellated, SMD
REVISION DATE: 22 May 2013 ISSUE: O PAGE: 11 of 29
TIM2C3 - Timer 2 channel 3 input
SC2MISO - SPI slave data out of serial controller 2
SC2MISO - SPI master data in of serial controller 2
18 24 PA2 I/O
Digital I/O
TIM2C4 - Timer 2 channel 4 output
TIM2C4 - Timer 2 channel 4 input
SC2SCL - TWI clock of serial controller 2
SC2SCL -SPI master/slave clock of serial controller 2
19 49 GND GND Ground
20 49 GND GND Ground
21 25 PA3 I/O
Digital I/O
SC2nSSEL - SPI slave select of serial controller 2
TRACECLK - Synchronous CPU trace clock
TIM2C2 - Timer 2 channel 2 output
TIM2C2 - Timer 2 channel 2 input
22 26 PA4 I/O
Digital I/O
ADC4 - ADC Input 4
PTI_EN - Frame signal of packet Trace Interface (PTI)
TRACEDATA2 - Synchronous CPU trace data bit 2
23 27 PA5 I/O
Digital I/O
ADC5 - ADC Input 5
PTI_DATA - Data signal of Packet Trace Interface (PTI)
nBOOTMODE
-
Embedded serial bootloader activation out of
reset
TRACEDATA3 - Synchronous CPU trace data bit 3
24 29 PA6 I/O
Digital I/O
TIM1C3 - Timer 1 channel 3 output
TIM1C3 - Timer 1 channel 3 input
25 30 PB1 I/O
Digital I/O
SC1MISO - SPI master/slave data out of serial controller 1
SC1SDA - TWI data of serial controller 1
SC1TXD - UART transmit data of serial controller 1
TIM2C1 - Timer 2 channel 1 output
TIM2C1 - Timer 2 channel 1 input
26 31 PB2 I/O
Digital I/O
SC1MISO - SPI master/slave data in of serial controller 1
SC1SCL - TWI clock of serial controller 1
SC1RXD - UART receive data of serial controller 1
TIM2C2 - Timer 2 channel 2 output
TIM2C2 - Timer 2 channel 2 input
27 32 JCLK I
JTAG clock input from debugger