User Manual

Module Specification
NO. AT357HPA
TITLE:
Module, ZigBee, 17.9 x 24.9 x 2.75mm, 51 I/O, Edge Castellated, SMD
REVISION DATE: 22 May 2013 ISSUE: O PAGE: 26 of 29
8.0 Regulatory Information
8.1 FCC Notice
This module complies with Part 15 of the FCC rules and regulations. Compliance
with the labeling requirements, FCC notice and antenna usage guideline is required.
The OEM must comply with the following regulations:
1. The OEM integrator must ensure that the text on the external label
provided with this device is placed on the outside of the final product.
2. AT357HPA module may only be used with antenna that have been tested
and approved for use with this module.
FCC Caution: Any changes or modifications not expressly approval by the party
responsible for compliance could void the user’s authority to operate this device.
8.2 OEM Labeling Requirements
The Original Equipment Manufacturing (OEM) must ensure that FCC labeling
requirements are met. This includes a clearly visible label on the outside of the
finished product specifying the AT357HPA FCC identifier (FCC ID: S2J-357HPA).
Below FCC label statements are required for OEM products containing AT357HPA
Module.
8.3 RF Exposure
This module has been certified for remote and base radio applications and is not
intended to be operated within 20cm of the body. If the module will be used for
portable applications, the OEM or OEM integrator is responsible for passing
additional SAR (Specific Absorption Rate) testing in accordance with FCC Rules
2.1093.
The preceding statement must be included as a CAUTION statement in OEM product
manuals in order to alert users of FCC RF exposure compliance.
Contains FCC ID:
S2J
-
357HPA
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference and (2)
This device must accept any interference received, including interference that may
cause undesired operation.