User Manual

Module Specification
NO. AT357HPA
TITLE:
Module, ZigBee, 17.9 x 24.9 x 2.75mm, 51 I/O, Edge Castellated, SMD
REVISION DATE: 22 May 2013 ISSUE: O PAGE: 28 of 29
If the CE conformity marking is reduced or enlarged the proportions given in the
above graduated drawing must be respected
2. Where the directive concerned does not impose specific dimensions, the CE
marking must have a height of at least 5 mm.
3. The CE marking must be affixed to the product or to its data plate. However,
where this is not possible or not warranted on account of the nature of the product, it
must be affixed to the packaging, if any, and to the accompanying documents, where
the directive concerned provides for such documents.
4. The CE marking must be affixed visibly, legibly and indelibly.
For more information please refer to http://ec.europa.eu/enterprise/faq/ce-mark.htm.
Customers assume full responsibility for learning and meeting the required guidelines
for each country in their distribution market.
8.7 CE Compliance Power Settings
Table 16 shows approved channels of operations with the corresponding maximum
output power steps settings.
Channel 11-26
AT357HPA -17dBm
Table 16: Maximum Power Settings for Europe (ESTI)