User Manual
Table Of Contents
- Copyright Notice
- Acknowledgement
- Packing List
- About this Document
- Safety Precautions
- FCC Statement
- China RoHS Requirements (CN)
- China RoHS Requirement (EN)
- Table of Contents
- Chapter 1 - Product Specifications
- Chapter 2 – Getting Started
- Chapter 3 – Accessories
- Chapter 4 – Frequently Asked Questions
- Appendix A - Statements
Chapter 2 – Getting Started 11
Rugged Tablet Computer
RTC-710RK
2.2 Notes before use
Before using your device, please read through the following instructions
⚫ Use only the power adapter that comes with your device. Using a different
power adapter may cause damage.
⚫ The AC power cord is designed for the RTC-710RK only.
⚫ This product is intended to be supplied by a Listed Power Adapter or DC power
source, rated 12Vdc, 3A minimum, Tma = 40°C. Please contact AAEON for
further assistance.
⚫ Using a power outlet is the best way to charge your device (refer to section 1.2
for the power adapter’s voltage output and acceptable input).
⚫ When using the device for the first time, fully charge the battery for up to 8
hours. If the device is inactive, charging the battery once per month is
recommended to prevent battery life deterioration.
⚫ There are two batteries in the RTC-710RK: Both batteries can be monitored at
the title bar). Charge the device once Hot-swappable battery drops below 20%.
⚫ Always allow your battery to be fully charged before use.
⚫ To prolong battery life, allow a fully charged battery to discharge more than
95% before recharging.
⚫ Ensure that the battery cover is properly secured by manually pushing the pin to
lock position.
⚫ The RTC-710RK CANNOT be charged via an USB connection.
⚫ The IP65 waterproof protection may get damaged when subjected to shock
greater than levels tested in MIL-STD-810G Method 516.6 Procedure IV. The
protection may also be affected if the rubber connector fails to cover or close
firmly.