Thank you for purchasing our product. Please read this User’s Manual before using the product. Change without Notice 7” Q TFT LCD MONITOR (LED Backlight) USER MANUAL Holtz Industries, INC.
Safety Precautions Federal Communications Commission (FCC) Statement This Equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Table of Content Safety Precaution.……..……………………………………………………………… 2 Table of Content.….…………………………………………………………………… 3 Features...……………………………………………………………………………… 4 Package Contents…….………………………………………………………….…… 4 TFT Installation………………………………………………………………………… 5 Signal Cable Description……..………………………………………………….…… 6 Control Cable Description……..……………………………………………………… 8 Front Panel Control.…………………………………………………………………… 9 OSD Menu ………………………..…..………………………………………….. 10 Video Setting Menu……………………………………………………….……….
Features Advanced OSD Menu for easy use Support up to 4 CCD Camera Inputs (Mini din Connector) Extra RCA Input for Multimedia (VCD, DVD, Game Device) Provide 1 Live Video / Audio Signal Output / Cam Out Auto Detection for NTSC / PAL System Signal Trigger for CAM A / CAM B / CAM C /CAM R / AV View Auto Brightness Adjustment by light sensor OSD Control for Individual Normal / Mirror Camera Image Switch Timer (2-100 sec) Step Selection via OSD (CAM A / CAM B / CAM C /CAM R / AV) Supported 9.
TFT Installation Step 1 Check the package and make sure all parts are included Step 2 Clip the sun-hood on to the monitor Step 3 Make sure it is installed properly Step 4 Install the monitor on to the bracket Step 5 Adjust the monitor to an appropriate / comfortable viewing angle before tightening the screws Step 6 Monitor installation is now completed. Each control cable wire is attached with a sticker to indicate its signal function. Referred to the identification sticker for further installation.
Signal Cable Description 1. CAM A (Mini din) For 1st camera connection 2. CAM B (Mini din) For 2nd camera connection 3. CAM C (Mini din) For 3rd camera connection 4. CAM R (Mini din) For 4th camera connection 5. LIVE VIDEO OUT (White Color RCA Jack) On screen video loop out (for recording, second monitor or other device) 6. LIVE AUDIO OUT (Black Color RCA Jack) On screen audio loop out (for recording, second monitor or other device) 7.
Mini Din Pin Assignment * Type 1 (Standard): 5 3 6 4 1. ----- 4. GND 2. ----- 5. +12V 3. Audio 6. Video *Type 2 (Optional): 2 1 1. GND 4. +12V 2. ------ 5. ------- 3. Video 6.
Control cable Description Don’t connect the red wire (power wire) of this product directly to the battery. Connect the red wire of this product to the ACC of the ignition key switch. Failure to do so may result in permanent damage of the product.
Front Panel Control POWER Press the power button to activate the monitor or to keep the monitor under stand by mode. Red light for stand by, Green light is turn on. MENU Press the menu button to pop up OSD menu. UP Scroll up the function item or increase value. DOWN Scroll down the function item or decrease value. SELECT With power on press this button to select image sequence.
JUMP Press this button, it can switch CAM A, CAM B, CAM R recurrently. With pull hand break and check the Jump option is ON, press this button to select image sequence QUAD SEQ CAM A+B CAM C+R CAM A+R CAM R+B CAM A+C CAM C+B CAM R/AB CAM R+AB CAM A CAM B CAM C CAM R, The default value is QUAD. OSD Menu 1. Press the MENU button to enter to the OSD Menu 2. Press UP & Down button to select the setting you wish to proceed. The picture of the content will turn rise high to identify your selection.
Video Setting Menu This menu set up contains different setting for the TFT LCD. Brightness Provide adjustment for shade and brightness level of TFT display. Setting value from 0 ~ 100. Default value is 50. Contrast Provide adjustment for the light and dark level of the TFT display. Setting value from 0 ~ 100. Default value is 50. Saturation Provide adjustment for the light intensity level of TFT display. Setting value from 0 ~ 100. Default value is 50.
Display Setting Menu This menu set up contains the on screen identification and the activation of the distance gage. Light Sensor Select “Auto” to activate the auto brightness adjustment function for screen. Or select “Night” to reduce the brightness for screen.Default value is Day. CAM Display Select “ON” to show the source of video input title on screen or “OFF” to keep it invisible. Default value is ON.
Camera Setting Menu This menu set up contains the on Camera and Jump setting. Normal/Mirror Set the all camera’s display mode. ► CAM A Select “Mirror” to activate the mirror function for different cameras or “Normal” for a normal image. Default value is Normal. CAM B Select “Mirror” to activate the mirror function for different cameras or “Normal” for a normal image. Default value is Normal. CAM C Select “Mirror” to activate the mirror function for different cameras or “Normal” for a normal image.
Jump Jump provide automatically channel switch function. Setting value from SEQ, A+B, C+R, A+R, R+B, A+C, C+B, R/AB, R+AB ,A ,B , C, R, QUAD. Default value is QUAD. Dir Image The screen image setting of this panel during left / right turn: TRIPLE: When you are making a right turn or left turn, the screen of panel will display triple images for left hand side, right hand side and rear view when you are making a right turn or left turn.
R+AB: Screen will display triple image from Cam R、Cam A、Cam B. Default value is R. CAM Out Composite video loop out to recorder, monitor or other device. QUAD Recording or viewing from the output device in quad mode CAM A Recording or viewing from the output device for CAM A image CAM B Recording or viewing from the output device for CAM B image CAM C Recording or viewing from the output device for CAM C image CAM R Recording or viewing from the output device for CAM R image Default value is QUAD.
Information Menu This menu can set device to default value and leave the OSD menu. Default Recall factory default. Exit Exit OSD menu to live screen.
Vehicle Installation Cam era Green Yellow 1M 0M 1M Red 2M Yellow Red 3M Green a. Install Camera R (for rear view) b. Use a measuring tool to mark out the distance behind the vehicle. c. Adjust the viewing angle of the camera so that the distance gage shown from the TFT match to the distance marks behind the vehicle. d. Switch to Rear view with source button, the screen always display on 16:9 While rear viewing, the screen always display on 16:9. SOURCE button: Rear viewing: 16 16 9 9 e.
Specification Channel Display Full Only Screen size 7 inch Active area 153.6(H) x 86.64(V) Pixel Pitch 0.192(H) x 0.1805(V) Resolution 800(H) x 480(V) Viewing angle UP:70° / Down:60° / Left: 75° / Right:75° Power source: DC9.
Attachment Attachment 1: Dimension Chart 19
Attachment 2: Installation Chart 20 85-ML074Q-A001G-B