User guide

Wallmount Chassis AEC-206
Chapter 2 Quick Installation Guide 2-4
2.3 Adding a CD-ROM Drive
To install a CD-ROM drive, please refer to the following charts and
procedures.
 Unscrew the
mounting bracket from
the chassis.
 Unscrew the black
front bracket and insert
the CD-ROM drive into
the mounting bracket
with its base facing
inward. Connect a 40-pin
flat cable and power
cable to the CD-ROM
drive, and attach it to the
bracket with four screws.
 Attach the
mounting bracket with
the CD-ROM drive inside
to the chassis with four
screws.