Embedded Controller AEC-6511 AEC-6511 Compact Embedded Controller Intel® Atom™ N270 1.6GHz Processor 1 Gigabit LAN, 2 USB2.0, 2 COM, 1 VGA AEC-6511 Manual 1st Ed.
Embedded Controller AEC-6511 Copyright Notice This document is copyrighted, 2012. All rights are reserved. The original manufacturer reserves the right to make improvements to the products described in this manual at any time without notice. No part of this manual may be reproduced, copied, translated, or transmitted in any form or by any means without the prior written permission of the original manufacturer. Information provided in this manual is intended to be accurate and reliable.
Embedded Controller AEC-6511 Acknowledgments All other products’ name or trademarks are properties of their respective owners. Award is a trademark of Award Software International, Inc. CompactFlash™ is a trademark of the Compact Flash Association. Microsoft Windows is a registered trademark of Microsoft Corp. Intel®, Atom™ are trademarks of Intel Corporation. PC/AT, PS/2, and VGA are trademarks of International Business Machines Corporation.
Embedded Controller AEC-6511 Packing List Before you begin operating your PC, please make sure that the following materials are enclosed: 1 AEC-6511 Embedded Controller (with wallmount Brackets) 1 Screw Package 1 CD-ROM for manual (in PDF format) and drivers If any of these items should be missing or damaged, please contact your distributor or sales representative immediately.
Embedded Controller AEC-6511 Safety & Warranty 1. Read these safety instructions carefully. 2. Keep this user's manual for later reference. 3. Disconnect this equipment from any AC outlet before cleaning. Do not use liquid or spray detergents for cleaning. Use a damp cloth. 4. For pluggable equipment, the power outlet must be installed near the equipment and must be easily accessible. 5. Keep this equipment away from humidity. 6. Put this equipment on a firm surface during installation.
Embedded Controller AEC-6511 d. The equipment does not work well, or you cannot get it to work according to the user’s manual. e. The equipment has been dropped and damaged. f. The equipment has obvious signs of breakage. 15. DO NOT LEAVE THIS EQUIPMENT IN AN ENVIRONMENT WHERE THE STORAGE TEMPERATURE IS BELOW -20°C (-4°F) OR ABOVE 70°C (158°F). IT MAY DAMAGE THE EQUIPMENT. FCC This device complies with Part 15 FCC Rules.
Embedded Controller AEC-6511 Below Table for China RoHS Requirements 产品中有毒有害物质或元素名称及含量 AAEON Boxer/ Industrial System 有毒有害物质或元素 部件名称 铅 汞 镉 六价铬 多溴联苯 多溴二苯醚 (Pb) (Hg) (Cd) (Cr(VI)) (PBB) (PBDE) × ○ ○ ○ ○ ○ × ○ ○ ○ ○ ○ × ○ ○ ○ ○ ○ × ○ ○ ○ ○ ○ 硬盘 × ○ ○ ○ ○ ○ 电源 × ○ ○ ○ ○ ○ 印刷电路板 及其电子组件 外部信号 连接器及线材 外壳 中央处理器 与内存 O：表示该有毒有害物质在该部件所有均质材料中的含量均在 SJ/T 11363-2006 标准规定的限量要求以下。 X：表示该有毒有害物质至少在该部件的某一均质材料中的含量超出 SJ/T 11363-2006 标准规定的限量要求。 备注： 一、此产品所标示之环保使用期限，系指在一般正常使用状况下。 二、上述
Embedded Controller Chapter 1 AEC-6511 General Information 1.1 Introduction................................................................ 1-2 1.2 Features .................................................................... 1-3 1.3 Specifications ............................................................ 1-4 1.4 Dimension ................................................................. 1-6 Chapter 2 Hardware Installation 2.1 USB 1/2 Connecter ..................................................
Embedded Controller Appendix B AEC-6511 I/O Information B.1 I/O Address Map ....................................................B-2 B.2 1st MB Memory Address Map ...............................B-3 B.3 IRQ Mapping Chart ................................................B-4 B.4 DMA Channel Assignments...................................
Embedded Controller AEC-6511 Chapter 1 General Information Chapter 1 General Information 1- 1
Embedded Controller AEC-6511 1.1 Introduction The newest Boxer series AEC-6511 has been introduced by AAEON and it utilizes Intel® Atom™ processor. In this era of information explosion, the advertising of consumer products will not be confined to the family television, but will also spread to high-traffic public areas, like department stores, the bus, transportation station, the supermarket etc.
Embedded Controller AEC-6511 1.2 Features Intel® AtomTM N270 1.
Embedded Controller AEC-6511 1.3 Specifications CPU Intel® AtomTM N270 1.6 GHz Processor Chipset Intel® 945GSE + ICH7M System Memory DDR2 SDRAM SODIMM x 1, Max. 2GB Display VGA Interface Storage Device Shared system memory up to 224MB/DVMT 3.0 SSD Type 2 CompactFlash™ Slot HDD SATA 1.5 Gb/s HDD Slim Hard Disk Drive Bay Network LAN Gigabit Ethernet, RJ-45 x 1 Wireless Optional by Mini Card USB Port USB2.
Embedded Controller AEC-6511 Mounting Wallmount Operating Temperature -4oF ~ 122oF (-20oC ~ 50oC) Storage Temperature -4oF ~ 158oF (-20oC ~ 70oC) Anti-Vibration 5 g rms/ 5~500 Hz/ operation-CFD 1 g rms/ 5~500 Hz/ operation-HDD Anti-Shock 50 G peak acceleration (11 msec. duration) – CFD 20 G peak acceleration (11 msec. duration) – HDD Certification EMC Dimension (W x H x D) CE/FCC Class A 13.23” x 11.57” x 10.24” (336mm x 294mm x 260mm) Gross Weight 6.4 lb (2.
Embedded Controller AEC-6511 1.
Embedded Controller AEC-6511 Front side Rear side Chapter 1 General Information 1- 7
Embedded Controller AEC-6511 Chapter 2 Hardware Installation Chapter 2 Quick Installation Guide 2-1
Embedded Controller AEC-6511 2.1 USB 1/2 Connecter Pin Signal Pin Signal 1 USB1 V+ 2 USB0 V+ 3 USB D0+ 4 USB D0- 5 USB0 GND 6 USB D1+ 7 USB D1- 8 USB1 GND 2.
Embedded Controller AEC-6511 2.
Embedded Controller AEC-6511 2.
Embedded Controller AEC-6511 2.
Embedded Controller 2.
Embedded Controller AEC-6511 2.
Embedded Controller 2.
Embedded Controller AEC-6511 Chapter 3 Award BIOS Setup Chapter 3 Award BIOS Setup 3-1
Embedded Controller 3.1 AEC-6511 System Test and Initialization These routines test and initialize board hardware. If the routines encounter an error during the tests, you will either hear a few short beeps or see an error message on the screen. There are two kinds of errors: fatal and non-fatal. The system can usually continue the boot up sequence with non-fatal errors.
Embedded Controller 3.2 AEC-6511 Award BIOS Setup Awards BIOS ROM has a built-in Setup program that allows users to modify the basic system configuration. This type of information is stored in battery-backed CMOS RAM so that it retains the Setup information when the power is turned off. Entering Setup Power on the computer and press immediately. This will allow you to enter Setup. Standard CMOS Features Use this menu for basic system configuration. (Date, time, IDE, etc.
Embedded Controller AEC-6511 PC Health Status This menu allows you to set the shutdown temperature for your system. Load Fail-Safe Defaults Use this menu to load the BIOS default values for the minimal/stable performance for your system to operate. Load Optimized Defaults Use this menu to load the BIOS default values that are factory settings for optimal performance system operations.
Embedded Controller AEC-6511 Chapter 4 Driver Installation Chapter 4 Driver Installation 4 - 1
Embedded Controller AEC-6511 The AEC-6511 comes with a CD-ROM that contains all drivers and utilities that meet your needs.
Embedded Controller AEC-6511 4.1 Installation: Insert the AEC-6511 CD-ROM into the CD-ROM Drive. And install the drivers from Step 1 to Step 4 in order. Step 1 – Install Chipset Driver 1. Click on the STEP1-CHIPSET folder and select the OS folder your system is 2. Double click on the Setup.exe located in each OS folder 3. Follow the instructions that the window shows 4. The system will help you install the driver automatically Step 2 – Install VGA Driver 1.
Embedded Controller AEC-6511 click on the Setup.exe 2. Follow the instructions that the window shows 3.
Embedded Controller AEC-6511 Appendix A Programming the Watchdog Timer Appendix A Programming the Watchdog Timer A-1
Embedded Controller AEC-6511 A.1 Programming AEC-6511 utilizes W83627DHG-P chipset as its watchdog timer controller. Below are the procedures to complete its configuration and the AAEON intial watchdog timer program is also attached based on which you can develop customized program to fit your application.
Embedded Controller AEC-6511 (3) Exit the W83627DHG config Mode. Undesired result may occur if the config Mode is not exited normally. (1) Enter the W83627DHG config Mode To enter the W83627DHG config Mode, two special I/O write operations are to be performed during Wait for Key state. To ensure the initial state of the key-check logic, it is necessary to perform two write operations to the Special Address port (2EH).
Embedded Controller = 010 AEC-6511 Power LED pin is driven low. = 011 Power LED pin outputs 2Hz pulse with 50% duty cycle. = 100 Power LED pin outputs 1Hz pulse with 50% duty cycle. = 101 Power LED pin outputs 4Hz pulse with 50% duty cycle. = 110 Power LED pin outputs 0.25Hz pulse with 50% duty cycle. =111 Power LED pin outputs 0.25Hz pulse with 50% duty cycle.. Bit 4 Bit 3 Bit 2 : WDTO# count mode is 1000 times faster. =0 Disable. =1 Enable. : select WDTO# count mode.
Embedded Controller AEC-6511 WatchDog Timer Register II (Index=F6h, Default=00h) Bit 7-0 = 0 x 00 Time-out Disable = 0 x 01 Time-out occurs after 1 second/minute = 0 x 02 Time-out occurs after 2 second/minutes = 0 x 03 Time-out occurs after 3 second/minutes ………………………………..
Embedded Controller =1 AEC-6511 Force Watchdog Timer time-out event: this bit is self-clearing Bit 4 Bit 3-0 : Watchdog Timer Status. R/W =1 Watchdog Timer time-out occurred =0 Watchdog Timer counting : These bits select IRQ resource for Watchdog. Setting of 2 selects SMI.
Embedded Controller AEC-6511 A.2 W83627DHG Watchdog Timer Initial Program Example: Setting 10 sec.
Embedded Controller AEC-6511 ;/////////////////////////////////////////////////////////////////////////////////////////////// Dec dx Mov al,0f5h ;CRF5 (PLED mode register) Out dx,al Inc dx In al,dx And al,not 08h ;Set second as counting unit Out dx,al ;/////////////////////////////////////////////////////////////////////////////////////////////// Dec dx Mov al,0f6h ; CRF6 Out dx,al Inc dx Mov al,10 ;Set timeout interval as 10 sec.
Embedded Controller AEC-6511 Appendix B I/O Information Appendix B I/O Information B - 1
Embedded Controller B.
Embedded Controller AEC-6511 B.
Embedded Controller B.3 IRQ Mapping Chart B.
