Embedded Controller AEC-6636 AEC-6636 Fanless Embedded Controller Intel® Core™ i5-2510E & Celeron® B810 Processor 2 Gigabit Ethernet, 4 USB, 4 COM 1 VGA AEC-6636 Manual 2nd Ed.
Embedded Controller AEC-6636 Copyright Notice This document is copyrighted, 2012. All rights are reserved. The original manufacturer reserves the right to make improvements to the products described in this manual at any time without notice. No part of this manual may be reproduced, copied, translated, or transmitted in any form or by any means without the prior written permission of the original manufacturer. Information provided in this manual is intended to be accurate and reliable.
Embedded Controller AEC-6636 Acknowledgments All other products’ name or trademarks are properties of their respective owners. AMI is a trademark of American Megatrends Inc. CFast™ is a trademark of the CompactFlash Association. Microsoft Windows is a registered trademark of Microsoft Corp. Intel®, Core™ are trademarks of Intel Corporation. PC/AT, PS/2, and VGA are trademarks of International Business Machines Corporation.
Embedded Controller AEC-6636 Packing List Before you begin operating the product, please make sure that the following materials are enclosed: 1 AEC-6636 Embedded Controller 2 Wallmount Brackets 1 Screw Package 4 RAM Thermal Pads (199815003 x 1, 1998666630 x 2, 1998666652 x 1) 1 DVD-ROM for manual (in PDF format) and drivers If any of these items should be missing or damaged, please contact your distributor or sales representative immediately.
Embedded Controller AEC-6636 Safety & Warranty 1. Read these safety instructions carefully. 2. Keep this user's manual for later reference. 3. Disconnect this equipment from any AC outlet before cleaning. Do not use liquid or spray detergents for cleaning. Use a damp cloth. 4. For pluggable equipment, the power outlet must be installed near the equipment and must be easily accessible. 5. Keep this equipment away from humidity. 6. Put this equipment on a firm surface during installation.
Embedded Controller AEC-6636 d. The equipment does not work well, or you cannot get it to work according to the user’s manual. e. The equipment has been dropped and damaged. f. The equipment has obvious signs of breakage. 15. DO NOT LEAVE THIS EQUIPMENT IN AN ENVIRONMENT WHERE THE STORAGE TEMPERATURE IS BELOW -20°C (-4°F) OR ABOVE 70°C (158°F). IT MAY DAMAGE THE EQUIPMENT. FCC This device complies with Part 15 FCC Rules.
Embedded Controller AEC-6636 Below Table for China RoHS Requirements 产品中有毒有害物质或元素名称及含量 AAEON Boxer/ Industrial System 有毒有害物质或元素 部件名称 铅 汞 镉 六价铬 多溴联苯 多溴二苯醚 (Pb) (Hg) (Cd) (Cr(VI)) (PBB) (PBDE) × ○ ○ ○ ○ ○ × ○ ○ ○ ○ ○ × ○ ○ ○ ○ ○ × ○ ○ ○ ○ ○ 硬盘 × ○ ○ ○ ○ ○ 电源 × ○ ○ ○ ○ ○ 印刷电路板 及其电子组件 外部信号 连接器及线材 外壳 中央处理器 与内存 O：表示该有毒有害物质在该部件所有均质材料中的含量均在 SJ/T 11363-2006 标准规定的限量要求以下。 X：表示该有毒有害物质至少在该部件的某一均质材料中的含量超出 SJ/T 11363-2006 标准规定的限量要求。 备注： 一、此产品所标示之环保使用期限，系指在一般正常使用状况下。 二、上述
Embedded Controller AEC-6636 Contents Chapter 1 General Information 1.1 Introduction................................................................ 1-2 1.2 Features .................................................................... 1-3 1.3 Specifications ............................................................ 1-4 Chapter 2 Hardware Installation 2.1 Dimension & Connectors of AEC-6636..................... 2-2 2.2 Connectors and Jumpers of the Main Board ............ 2-5 2.3 List of Jumpers ....
Embedded Controller Appendix B AEC-6636 I/O Information B.1 I/O Address Map ....................................................B-2 B.2 Memory Address Map............................................B-4 B.3 IRQ Mapping Chart ................................................B-5 B.4 DMA Channel Assignments...................................B-7 Appendix C RAID & AHCI Settings C.1 Setting RAID ......................................................... C-2 C.2 Setting AHCI ...................................
Embedded Controller AEC-6636 Chapter 1 General Information Chapter 1 General Information 1- 1
Embedded Controller AEC-6636 1.1 Introduction The newest Boxer series AEC-6636 has been introduced by AAEON and it utilizes Intel® Core™ i5 2510E 2.5 GHz/ Celeron® B810 1.6 GHz processor. This condensed Embedded Controller is a fanless controller with the latest Intel® processor and chipset. The cutting-edge technology has been equipped to the AEC-6636 to satisfy the versatile demands of Factory Automation, Vehicle, and Digital Signage.
Embedded Controller AEC-6636 1.2 Features Intel® Core™ i5 2510E/ Intel® Celeron® B810 Processor Intel® QM67 Chipset COM x 4 USB x 4 VGA x 1 Gigabit Ethernet x 2 2.
Embedded Controller AEC-6636 1.3 Specifications Intel® Core™ i5 2510E 2.5 GHz/ Intel® CPU Celeron® B810 1.6 GHz Chipset Intel® QM67 System Memory DDR3 1066/1333 SDRAM SODIMM x 1, Max. 8 GB Display VGA D-Sub 15 x 1(optional 2nd VGA) Interface DVI Optional extension kit Storage SSD Onboard CFast™ x 1 Device HDD 2.5” SATA Hard Disk Drive Bay x 1 Network LAN Gigabit Ethernet USB Host USB2.0 x 2 Audio Line-out Others Power ON/OFF Switch x 1, antenna hole x 2 USB Host USB2.
Embedded Controller AEC-6636 Operating Temperature 32oF ~113oF (0oC~45oC)--CFast 32oF ~122oF (0oC~50oC)--HDD Storage Temperature -4oF ~158oF (-20oC~70oC) Anti-Vibration Anti-Shock 5 g rms/5~500 Hz/ random operation (CFast); 1 g rms/5~500 Hz/ random operation (HDD) 50 G peak acceleration (11 msec, duration)-CFast 20 G peak acceleration (11 msec, duration)-HDD Certification EMC CE/FCC Class A Dimension 8.35” (W) x 2.52” (H) x 6.2”(D) (212mm x 64mm x 156mm) Gross Weight 7.94 lb (3.
Embedded Controller AEC-6636 Chapter 2 Hardware Installation Chapter 2 Hardware Installation 2-1
Embedded Controller AEC-6636 2.
Embedded Controller AEC-6636 Connectors on the front panel Connectors on the rear panel Chapter 2 Hardware Installation 2 - 3
Embedded Controller A1M/A2M Version Chapter 2 Hardware Installation 2 - 4 AEC-6636
Embedded Controller AEC-6636 2.
Embedded Controller Solder Side Chapter 2 Hardware Installation 2 - 6 AEC-6636
Embedded Controller AEC-6636 2.3 List of Jumpers The board has a number of jumpers that allow you to configure your system to suit your application.
Embedded Controller AEC-6636 CN3 USB2.0 Port 7 and 8 CN4 USB2.0 Port 5 and 6 CN5 USB2.
Embedded Controller AEC-6636 CN28 CFast™ Slot CN29 DDR3 SODIMM Slot CN30 Mini Card Slot SATA1 SATA Port 1 Connector SATA2 SATA Port 2 Connector Chapter 2 Hardware Installation 2 - 9
Embedded Controller AEC-6636 2.
Embedded Controller AEC-6636 2.
Embedded Controller AEC-6636 Step 3: Unfasten the six screws of the bottom cover Step 4: Unfasten the two screws of the CFast™ bracket Chapter 2 Hardware Installation 2 - 12
Embedded Controller AEC-6636 Step 5: Install the CFast™ Card to the CFast™ slot and adhere the thermal pad onto the CFast™ Card.
Embedded Controller AEC-6636 2.
Embedded Controller AEC-6636 Step 3: Unfasten the six screws of the bottom cover Step 4: Get the HDD and HDD Bracket ready.
Embedded Controller AEC-6636 Step 5: Connect the SATA cable to the HDD Step 6: Close the bottom cover of the AEC-6636 and fasten the screws Chapter 2 Hardware Installation 2 - 16
Embedded Controller AEC-6636 2.
Embedded Controller AEC-6636 Step 3: Unfasten the six screws of the bottom cover Step 4: Unfasten the screws of the bracket of Memory Card Chapter 2 Hardware Installation 2 - 18
Embedded Controller AEC-6636 Step 5: Adhere the Thermal pads onto the top and bottom of the Memory Card, and then insert the RAM at 30-degree angle to the memory slot and press Step 6: Fasten the screws of the bracket of Memory Card and finish the installation Chapter 2 Hardware Installation 2 - 19
Embedded Controller AEC-6636 2.9 Wallmount Kit Installation Get the brackets ready and fasten appropriate four screws on each bracket. After fastening the two brackets on the bottom lid of AEC-6636, the wallmount kit installation has been finished.
Embedded Controller AEC-6636 Chapter 3 AMI BIOS Setup Chapter 3 AMI BIOS Setup 3-1
Embedded Controller 3.1 AEC-6636 System Test and Initialization These routines test and initialize board hardware. If the routines encounter an error during the tests, you will either hear a few short beeps or see an error message on the screen. There are two kinds of errors: fatal and non-fatal. The system can usually continue the boot up sequence with non-fatal errors. System configuration verification These routines check the current system configuration against the values stored in the CMOS memory.
Embedded Controller 3.2 AEC-6636 AMI BIOS Setup AMI BIOS ROM has a built-in Setup program that allows users to modify the basic system configuration. This type of information is stored in battery-backed CMOS RAM so that it retains the Setup information when the power is turned off. Entering Setup Power on the computer and press or immediately. This will allow you to enter Setup. Main Set the date, use tab to switch between date elements.
Embedded Controller Press ‘Delete’ Key to enter Setup menu Main Chapter 3 AMI BIOS Setup 3-4 AEC-6636
Embedded Controller AEC-6636 Advanced Chapter 3 AMI BIOS Setup 3-5
Embedded Controller AEC-6636 ACPI Settings Options summary: Disable Enable Hibernation Enable Optimal Default, Failsafe Default Enables or Disables System ability to Hibernate (OS/S4 Sleep State). This option may be not effective with some OS.
Embedded Controller AEC-6636 Select the highest ACPI sleep state the system will enter when the SUSPEND button is pressed.
Embedded Controller AEC-6636 Wake system with Dynamic Time Enable Disable Optimal Default, Failsafe Default Wake up minute 0 increase Select RTC wake mode CPU Configuration Options summary : Disabled Hyper-Threading Chapter 3 AMI BIOS Setup 3-8
Embedded Controller AEC-6636 Enabled Optimal Default, Failsafe Default En/Disable CPU Hyper-Threading function Active Processor Cores All Optimal Default, Failsafe Default 1 Number of cores to enable in each processor package.
Embedded Controller AEC-6636 To turn on/off prefetching of adjacent cache lines.
Embedded Controller AEC-6636 SATA Configuration Options summary: SATA Controller(s) Enable Optimal Default, Failsafe Default Disable Enable or disable SATA Device. SATA Mode Selection IDE Default AHCI RAID Determines how SATA controller(s) operate.
Embedded Controller Intel TXT Chapter 3 AMI BIOS Setup 3-12 AEC-6636
Embedded Controller AEC-6636 Intel Anti-Theft Options summary: Intel(R) Anti-Theft Disable Optimal Default, Failsafe Default Technology Configuration Enable Disabling Intel(R) AT Allow user to login to platform. This is strictly for testing only. This does not disable AT Services in ME.
Embedded Controller AEC-6636 USB Configuration Options summary: Enabled Legacy USB Support Optimal Default, Failsafe Default Disabled Auto Enables BIOS Support for Legacy USB Support. When enabled, USB can be functional in legacy environment like DOS.
Embedded Controller AEC-6636 Floppy Forced FDD Hard Disk CDROM If Auto. USB devices less than 530MB will be emulated as Floppy and remaining as Floppy and remaining as hard drive. Forced FDD option can be used to force a HDD formatted drive to boot as FDD(Ex.
Embedded Controller Super IO Configuration Chapter 3 AMI BIOS Setup 3-16 AEC-6636
Embedded Controller AEC-6636 Serial Port 1 Configuration Chapter 3 AMI BIOS Setup 3-17
Embedded Controller Serial Port 2 Configuration Chapter 3 AMI BIOS Setup 3-18 AEC-6636
Embedded Controller AEC-6636 Serial Port 3 Configuration Chapter 3 AMI BIOS Setup 3-19
Embedded Controller AEC-6636 Serial Port 4 Configuration Options summary: Serial Port Disabled Enabled Default Enable or Disable Serial Port (COM) Change Settings Auto (Serial Port 1) IO=3F8h; IRQ=4; IO=3F8h; IRQ=3,4,5,6,7,9,10,11,12; IO=2F8h; IRQ=3,4,5,6,7,9,10,11,12; Chapter 3 AMI BIOS Setup 3-20 Default
Embedded Controller AEC-6636 IO=3E8h; IRQ=3,4,5,6,7,9,10,11,12; IO=2E8h; IRQ=3,4,5,6,7,9,10,11,12; Select an optimal setting for Super IO device.
Embedded Controller AEC-6636 IO=2F8h; IRQ=3,4,5,6,7,9,10,11,12; IO=3E8h; IRQ=3,4,5,6,7,9,10,11,12; IO=2E8h; IRQ=3,4,5,6,7,9,10,11,12; Select an optimal setting for Super IO device. Change Settings Auto (Serial Port 4) IO=2E8h; IRQ=10; IO=3F8h; IRQ=3,4,5,6,7,9,10,11,12; IO=2F8h; IRQ=3,4,5,6,7,9,10,11,12; IO=3E8h; IRQ=3,4,5,6,7,9,10,11,12; IO=2E8h; IRQ=3,4,5,6,7,9,10,11,12; Select an optimal setting for Super IO device.
Embedded Controller AEC-6636 SandyBridge PPM Configuration Options summary: EIST Disabled Enabled Default Enable/Disable Intel SpeedStep CPU C1 Enhanced Disabled Report Enabled Default Enable/Disable CPU C1 Enhanced report to OS CPU C3 Report Disabled Enabled Default Enable/Disable CPU C3(ACPI C2) report to OS Chapter 3 AMI BIOS Setup 3-23
Embedded Controller CPU C6 Report AEC-6636 Disabled Enabled Default Enable/Disable CPU C6(ACPI C3) report to OS CPU C7 Report Disabled Enabled Enable/Disable CPU C7(ACPI C3) report to OS Chipset Onboard Device parameters Chapter 3 AMI BIOS Setup 3-24 Default
Embedded Controller AEC-6636 Onboard Device Options summary: LAN1 Controller Disabled Enabled Default Enable or disable LAN1(Intel i82579). Wake on LAN Disabled Enabled Default Enable or disable integrated LAN1 to wake the system.
Embedded Controller AEC-6636 Enable or disable LAN2(Realtek RTL8111E). Wake-on-LAN(WOL) function is controlled by PCIe PME. Disabled Onboard HD Audio Enabled Default Disable or Enable Onboard HD audio codec.
Embedded Controller AEC-6636 Select which of IGFX/PEG/PCI Graphics device should be Primary Display Or select SG for Switchable Gfx. Internal Graphics Auto Default Disabled Enabled Keep IGD enabled based on the setup options. Load IGFX VBIOS Disabled Enabled Default Enable or disable CSM load IGFX VBIOS. GTT Size 1MB 2MB Default Enable or disable CSM load IGFX VBIOS.
Embedded Controller AEC-6636 256 M 288 M 320 M 352 M 384 M 416 M 448 M 480 M 512 M Select DVMT 5.0 Pre-Allocated (Fixed) Graphics Memory size used by the Internal Graphics Device. 128M DVMT Total Gfx Mem 256M MAX Select DVMT5.0 Total Graphic Memory size used by the Internal Graphics Device.
Embedded Controller AEC-6636 Memory Information Options summary: Memory Frequency Auto Default 1067 1333 1600 Maximum Memory Frequency Selections in Mhz.
Embedded Controller AEC-6636 PCH-IO Configuration Options summary: Disabled High Precision Timer Enabled Default Enable or Disable the High Precision Event Timer.
Embedded Controller AEC-6636 4-5 Seconds Default Select a minimum assertion width of the SLP_S4# signal Restore AC Power Loss Power On Power Off Default Last State Select AC power state when power is re-applied after a power failure.
Embedded Controller AEC-6636 USB Configuration Options summary: USB Ports Per-Port Disable Disabled Control Enabled Default Control each of the USB ports (0~9) disabling. Disabled USB Port #1 Disable Enabled Default Disable USB port. Disabled USB Port #2 Disable Enabled Disable USB port.
Embedded Controller USB Mini Card Disable AEC-6636 Disabled Enabled Default Disable USB port. USB Port #3 Disable Disabled Enabled Default Disable USB port. USB Port #4 Disable Disabled Enabled Default Disable USB port.
Embedded Controller AEC-6636 Boot Options summary: Integer Setup Prompt Timeout Number of seconds to wait for setup activation key. 65535(0xFFFF) means indefinite waiting.
Embedded Controller AEC-6636 Always UPON REQUEST - GA20 can be disabled using BIOS services. ALWAYS - do not allow disabling GA20; this option is useful when any RT code is executed above 1MB.
Embedded Controller AEC-6636 Security Change User/Supervisor Password You can install a Supervisor password, and if you install a supervisor password, you can then install a user password. A user password does not provide access to many of the features in the Setup utility. If you highlight these items and press Enter, a dialog box appears which lets you enter a password. You can enter no more than six letters or numbers. Press Enter after you have typed in the password.
Embedded Controller AEC-6636 Removing the Password Highlight this item and type in the current password. At the next dialog box press Enter to disable password protection.
Embedded Controller AEC-6636 Chapter 4 Driver Installation Chapter 4 Driver Installation 4-1
Embedded Controller AEC-6636 The AEC-6636 comes with a DVD-ROM that contains all drivers your need. Follow the sequence below to install the drivers: Step 1 – Install Chipset Driver Step 2 – Install VGA Driver Step 3 – Install LAN 1 Driver Step 4 – Install LAN 2 Driver Step 5 – Install Audio Driver Step 6 – Install ME Driver Step 7 – Install RAID & AHCI Driver Please read following instructions for detailed installations.
Embedded Controller AEC-6636 4.1 Installation Insert the AEC-6636 DVD-ROM into the DVD-ROM Drive. And install the drivers from Step 1 to Step 7 in order. Step 1 – Install Chipset Driver 1. Click on the STEP1-CHIPSET folder and double click on the infinst_autol_9.3.0.1026.exe 2. Follow the instructions that the window shows 3. The system will help you to install the driver automatically Step 2 – Install VGA Driver 1. Click on the STEP2-VGA folder and select the OS your system is 2. Double click on Setup.
Embedded Controller AEC-6636 Step 4 – Install LAN 2 Driver (For Realtek LAN Chip) 1. Click on the STEP4-LAN2 folder and select the OS your system is 2. Double click on setup.exe file located in each OS folder 3. Follow the instructions that the window shows 4. The system will help you to install the driver automatically Step 5 – Install Audio Driver 1. Click on the STEP5-AUDIO folder and select the OS your system is 2. Double click on Setup.exe file located in each OS folder 3.
Embedded Controller AEC-6636 Appendix A Programming the Watchdog Timer Appendix A Programming the Watchdog Timer A-1
Embedded Controller AEC-6636 A.1 Programming AEC-6636 utilizes ITE IT8728F chipset as its watchdog timer controller. Below are the procedures to complete its configuration and the AAEON intial watchdog timer program is also attached based on which you can develop customized program to fit your application. Configuring Sequence Description After the hardware reset or power-on reset, the ITE 8728F enters the normal mode with all logical devices disabled except KBC.
Embedded Controller AEC-6636 There are three steps to complete the configuration setup: (1) Enter the MB PnP Mode; (2) Modify the data of configuration registers; (3) Exit the MB PnP Mode. Undesired result may occur if the MB PnP Mode is not exited normally. (1) Enter the MB PnP Mode To enter the MB PnP Mode, four special I/O write operations are to be performed during Wait for Key state.
Embedded Controller AEC-6636 WatchDog Timer Configuration Registers Configure Control (Index=02h) This register is write only. Its values are not sticky; that is to say, a hardware reset will automatically clear the bits, and does not require the software to clear them.
Embedded Controller AEC-6636 WatchDog Timer Control Register (Index=71h, Default=00h) WatchDog Timer Configuration Register (Index=72h, Default=00h) WatchDog Timer Time-out Value Register (Index=73h, Default=00h) Appendix A Programming the Watchdog Timer A-5
Embedded Controller AEC-6636 A.2 ITE8728F Watchdog Timer Initial Program .MODEL SMALL .CODE Main: CALL Enter_Configuration_mode CALL Check_Chip mov cl, 7 call Set_Logic_Device ;time setting mov cl, 10 ; 10 Sec dec al Watch_Dog_Setting: ;Timer setting mov al, cl mov cl, 73h call Superio_Set_Reg ;Clear by keyboard or mouse interrupt mov al, 0f0h mov cl, 71h call Superio_Set_Reg ;unit is second.
Embedded Controller AEC-6636 ; game port enable mov cl, 9 call Set_Logic_Device Initial_OK: CALL Exit_Configuration_mode MOV AH,4Ch INT 21h Enter_Configuration_Mode PROC NEAR MOV SI,WORD PTR CS:[Offset Cfg_Port] MOV DX,02Eh MOV CX,04h Init_1: MOV AL,BYTE PTR CS:[SI] OUT DX,AL INC SI LOOP Init_1 RET Enter_Configuration_Mode ENDP Exit_Configuration_Mode PROC NEAR MOV AX,0202h CALL Write_Configuration_Data Appendix A Programming the Watchdog Timer A-7
Embedded Controller AEC-6636 RET Exit_Configuration_Mode ENDP Check_Chip PROC NEAR MOV AL,20h CALL Read_Configuration_Data CMP AL,87h JNE Not_Initial MOV AL,21h CALL Read_Configuration_Data CMP AL,12h JNE Not_Initial Need_Initial: STC RET Not_Initial: CLC RET Check_Chip ENDP Read_Configuration_Data PROC NEAR MOV DX,WORD PTR CS:[Cfg_Port+04h] OUT DX,AL Appendix A Programming the Watchdog Timer A-8
Embedded Controller AEC-6636 MOV DX,WORD PTR CS:[Cfg_Port+06h] IN AL,DX RET Read_Configuration_Data ENDP Write_Configuration_Data PROC NEAR MOV DX,WORD PTR CS:[Cfg_Port+04h] OUT DX,AL XCHG AL,AH MOV DX,WORD PTR CS:[Cfg_Port+06h] OUT DX,AL RET Write_Configuration_Data ENDP Superio_Set_Reg proc near push ax MOV DX,WORD PTR CS:[Cfg_Port+04h] mov al,cl out dx,al pop ax inc dx out dx,al ret Superio_Set_Reg endp.
Embedded Controller AEC-6636 push ax push cx xchg al,cl mov cl,07h call Superio_Set_Reg pop cx pop ax ret Set_Logic_Device endp ;Select 02Eh->Index Port, 02Fh->Data Port Cfg_Port DB 087h,001h,055h,055h DW 02Eh,02Fh END Main Note: Interrupt level mapping 0Fh-Dh: not valid 0Ch: IRQ12 . .
Embedded Controller AEC-6636 Appendix B I/O Information Appendix B I/O Information B-1
Embedded Controller B.
Embedded Controller AEC-6636 Appendix B I/O Information B-3
Embedded Controller B.
Embedded Controller AEC-6636 B.
Embedded Controller Appendix B I/O Information B-6 AEC-6636
Embedded Controller AEC-6636 B.
Embedded Controller AEC-6636 Appendix C RAID & AHCI Settings Appendix C RAID & AHCI Settings C-1
Embedded Controller AEC-6636 C.1 Setting RAID OS installation to setup RAID mode Step 1: Copy the files below from the Driver CD: STEP7-RAID&AHCI\WINXP_32 to Disk. Step 2: Connect the USB Floppy (Disk with the RAID&AHCI files) to the board.
Embedded Controller AEC-6636 Step 3: The setting procedures “In BIOS Setup Menu”: Select Advanced -> SATA Configuration -> SATA Mode Selection -> RAID Step 4: Select Advanced -> Launch Storage OpROM -> Enabled Appendix C RAID & AHCI Settings C-3
Embedded Controller AEC-6636 Step 5: Select Boot -> Boot Option #1 -> DVD ROM Type Step 6: Select Save & Exit -> Save Changes and Exit Appendix C RAID & AHCI Settings C-4
Embedded Controller AEC-6636 Step 7: Press “Ctrl-I” to enter MAIN MENU Step 8: Select “1.
Embedded Controller AEC-6636 Step 9: Select RAID Level -> RAID0(Stripe) Step 10: Select “Create Volume” Appendix C RAID & AHCI Settings C-6
Embedded Controller AEC-6636 Step 11: Type “Y” for confirmation Step 12: Select “5.
Embedded Controller Step 13: Choose “Y” Step 14: Setup OS Appendix C RAID & AHCI Settings C-8 AEC-6636
Embedded Controller AEC-6636 Step 15: Press “F6” Step 16: Choose “S” Appendix C RAID & AHCI Settings C-9
Embedded Controller AEC-6636 Step 17: Select the “Intel® Mobile Express Chipset SATA RAID Controller” Step 18: Select “ENTER” after choosing the model number.
Embedded Controller AEC-6636 Step 19: Setup is loading files.
Embedded Controller AEC-6636 C.2 Setting AHCI OS Installation to Setup AHCI mode Step 1: Copy the files below from the Driver CD: STEP7-RAID&AHCI\WINXP_32 to Disk. Step 2: Connect the USB Floppy Disk with the RAID&AHCI files to the board.
Embedded Controller AEC-6636 Step 3: To install “In BIOS Setup Menu”, select Advanced -> SATA Configuration -> SATA Mode Selection -> AHCI Step 4: Next, select Boot -> Boot Option #1 -> DVD ROM Type Appendix C RAID & AHCI Settings C-13
Embedded Controller AEC-6636 Step 5: To save, select Save & Exit -> Save Changes and Exit Step 6: Setup OS Appendix C RAID & AHCI Settings C-14
Embedded Controller AEC-6636 Step 7: Press “F6” Step 8: Choose “S” Appendix C RAID & AHCI Settings C-15
Embedded Controller AEC-6636 Step 9: Choose “Intel® Mobile Express Chipset SATA AHCI Controller Step 10: Select “ENTER” to choose the model number Appendix C RAID & AHCI Settings C-16
Embedded Controller AEC-6636 Step 11: Setup is loading files Appendix C RAID & AHCI Settings C-17
