Instruction Manual

Embedded Controller AEC-6911
Chapter 2 Hardware Installation
2 - 9
Pin Signal Pin Signal
1 DCD (422TXD-/485DATA-) 2 RXD (422RXD+)
3 TXD (422TXD+/485DATA+) 4 DTR (422RXD-)
5 GND 6 DSR
7 RTS 8 CTS
9 RI 10 N.C.
2.10 Hard Disk Drive Installation
Disassemble the AEC-6911
For Hard Disk Drive (HDD) installation, you have to disassemble
the bottom lid of AEC-6911 and some components and covers in
the AEC-6911.
Step 1: Unfasten the two screws on the rear panel.